| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368 |
- /* Read-only ThinkPad embedded-controller sensors (see tpec.h).
- *
- * The X201 (i5 M 520, Arrandale) has no IT87xx Super I/O like the
- * AT3IONT-I. Its board temperatures and the fan tachometer live behind the
- * ACPI embedded controller, which Linux's thinkpad_acpi reads through the
- * same ports: command/status 0x66, data 0x62. The EC protocol is simple
- * enough to drive directly:
- *
- * write 0x80 (read) to 0x66, then the register index to 0x62,
- * wait for OBF (0x01) and read the byte back from 0x62.
- *
- * The SMBIOS type 1 entry gates the probe to Lenovo/IBM machines, so the
- * EC ports are never touched on the ASUS board, QEMU or other hardware.
- *
- * Two details matter on real hardware:
- * - There is no SCI handler, so hotkey events queue up in the output buffer.
- * A pending byte is drained before every command; otherwise the EC would
- * never replace it with the register we asked for.
- * - Firmware keeps running in legacy/SMM mode (we have no ACPI interpreter),
- * so an SMI can access the EC between our port accesses. The status
- * handshake plus bounded polling keeps that to an occasional bad sample;
- * nothing is written, so the EC state cannot be corrupted.
- *
- * EC register map (thinkpad_acpi): 0x78..0x7F and 0xC0..0xC7 temperatures
- * (0x80 = sensor not present, 0x00 = register not implemented), 0x84/0x85
- * fan tachometer LSB/MSB and 0x2F fan control (bit 7 automatic, bit 6
- * disengaged/full speed, bits 2:0 level). EC 0xEF is the functional
- * revision: revision 3 and later only implement the 0x78..0x7F sensors.
- */
- #include "tpec.h"
- #include "paging.h"
- #include "pci.h" /* port_inb/port_outb */
- #include "serial.h"
- #define EC_DATA 0x62
- #define EC_STS 0x66
- #define EC_OBF 0x01 /* output buffer full */
- #define EC_IBF 0x02 /* input buffer full */
- #define EC_READ 0x80
- #define TP_FAN_LEVEL 0x2F
- #define TP_FAN_LSB 0x84
- #define TP_FAN_MSB 0x85
- #define TP_TEMP_LO 0x78 /* temp_c[0..7] */
- #define TP_TEMP_HI 0xC0 /* temp_c[8..15] */
- #define TP_EC_REV 0xEF /* EC functional revision */
- /* Enough for a slow EC command (tens of milliseconds of port polls) but
- * short enough that a dead controller cannot stall the boot or a syscall. */
- #define EC_POLL_MAX 20000
- static int tpec_state = -1; /* -1 unprobed, 0 absent, 1 present */
- static unsigned int tpec_ec_rev;
- static char tpec_vendor[16];
- static char tpec_product[32];
- static char tpec_version[32];
- static unsigned int rd32(const unsigned char *p)
- {
- return (unsigned int)p[0] | ((unsigned int)p[1] << 8) |
- ((unsigned int)p[2] << 16) | ((unsigned int)p[3] << 24);
- }
- static void copy_trim(char *dst, unsigned int size, const unsigned char *src)
- {
- unsigned int i = 0;
- while (i + 1 < size && src && src[i]) {
- dst[i] = (char)src[i];
- i++;
- }
- while (i && dst[i - 1] == ' ')
- i--;
- dst[i] = '\0';
- }
- /* Map every 4 MB page touched by [addr, addr+len); SMBIOS tables can sit
- * above the 128 MB identity map on larger machines (same approach as
- * acpi.c). */
- static void map_range(unsigned int addr, unsigned int len)
- {
- unsigned int p = addr & 0xFFC00000u;
- unsigned int last = (addr + len - 1u) & 0xFFC00000u;
- for (;;) {
- paging_map_ram(p, 0x400000u);
- if (p >= last || p > 0xFFC00000u - 0x400000u)
- break;
- p += 0x400000u;
- }
- }
- /* The n-th (1-based) string that follows a formatted SMBIOS structure. */
- static const unsigned char *smbios_string(const unsigned char *p,
- const unsigned char *end,
- unsigned int index)
- {
- unsigned int n = 1;
- if (!index)
- return 0;
- while (p < end && *p) {
- const unsigned char *s = p;
- if (n == index)
- return s;
- while (p < end && *p)
- p++;
- p++;
- n++;
- }
- return 0;
- }
- static int smbios_type1(char vendor[16], char product[32], char version[32])
- {
- const unsigned char *ep = 0;
- const unsigned char *table, *end, *p;
- unsigned int addr, table_addr, table_len, i;
- for (addr = 0xF0000; addr < 0x100000; addr += 16) {
- const unsigned char *q = (const unsigned char *)addr;
- unsigned char sum = 0;
- unsigned int len;
- if (q[0] != '_' || q[1] != 'S' || q[2] != 'M' || q[3] != '_')
- continue;
- len = q[5];
- if (len < 0x1F || len > 0x40)
- continue;
- for (i = 0; i < len; i++)
- sum = (unsigned char)(sum + q[i]);
- if (sum)
- continue;
- if (q[0x10] != '_' || q[0x11] != 'D' || q[0x12] != 'M' ||
- q[0x13] != 'I' || q[0x14] != '_')
- continue;
- ep = q;
- break;
- }
- if (!ep)
- return -1;
- table_len = (unsigned int)ep[0x16] | ((unsigned int)ep[0x17] << 8);
- table_addr = rd32(ep + 0x18);
- if (table_addr < 0x1000 || table_addr >= 0xFF000000u ||
- table_len < 4 || table_len > 0x10000u ||
- table_addr + table_len < table_addr)
- return -1;
- map_range(table_addr, table_len);
- table = (const unsigned char *)table_addr;
- end = table + table_len;
- for (p = table; p + 4 <= end; ) {
- unsigned char type = p[0];
- unsigned int len = p[1];
- const unsigned char *strs, *next;
- if (len < 4)
- break;
- if (type == 127) /* end-of-table */
- break;
- strs = p + len;
- if (strs > end)
- break;
- if (type == 1) {
- if (len >= 8) {
- copy_trim(vendor, 16,
- smbios_string(strs, end, p[4]));
- copy_trim(product, 32,
- smbios_string(strs, end, p[5]));
- copy_trim(version, 32,
- smbios_string(strs, end, p[6]));
- return 0;
- }
- break;
- }
- next = strs;
- while (next + 1 < end && !(next[0] == 0 && next[1] == 0))
- next++;
- next += 2;
- if (next > end)
- break;
- p = next;
- }
- return -1;
- }
- static int ec_wait(unsigned char mask, int set)
- {
- unsigned int i;
- for (i = 0; i < EC_POLL_MAX; i++) {
- unsigned char st = port_inb(EC_STS);
- if (st == 0xFF) /* no controller on these ports */
- return -1;
- if (set ? (st & mask) != 0 : (st & mask) == 0)
- return 0;
- }
- return -1;
- }
- /* Keep a stale output byte (a hotkey event) from shadowing the register we
- * are about to read. */
- static int ec_drain(void)
- {
- unsigned int i;
- for (i = 0; i < 64; i++) {
- unsigned char st = port_inb(EC_STS);
- if (st == 0xFF)
- return -1;
- if (!(st & EC_OBF))
- return 0;
- (void)port_inb(EC_DATA);
- }
- return -1;
- }
- static int ec_read(unsigned char reg, unsigned char *out)
- {
- if (ec_drain())
- return -1;
- if (ec_wait(EC_IBF, 0))
- return -1;
- port_outb(EC_STS, EC_READ);
- if (ec_wait(EC_IBF, 0))
- return -1;
- port_outb(EC_DATA, reg);
- if (ec_wait(EC_OBF, 1))
- return -1;
- *out = port_inb(EC_DATA);
- return 0;
- }
- static int str_eq(const char *a, const char *b)
- {
- while (*a && *a == *b) {
- a++;
- b++;
- }
- return *a == *b;
- }
- static void log_info(void)
- {
- serial_puts(SERIAL_COM1, "tpec: ");
- if (tpec_vendor[0]) {
- serial_puts(SERIAL_COM1, tpec_vendor);
- serial_puts(SERIAL_COM1, " ");
- }
- if (tpec_product[0]) {
- serial_puts(SERIAL_COM1, tpec_product);
- serial_puts(SERIAL_COM1, " ");
- }
- if (tpec_version[0])
- serial_puts(SERIAL_COM1, tpec_version);
- }
- void tpec_init(void)
- {
- char vendor[16], product[32], version[32];
- unsigned char probe, rev;
- tpec_state = 0;
- tpec_vendor[0] = '\0';
- tpec_product[0] = '\0';
- tpec_version[0] = '\0';
- if (smbios_type1(vendor, product, version) != 0) {
- serial_puts(SERIAL_COM1, "tpec: no SMBIOS type 1, disabled\n");
- return;
- }
- copy_trim(tpec_vendor, sizeof(tpec_vendor), (const unsigned char *)vendor);
- copy_trim(tpec_product, sizeof(tpec_product),
- (const unsigned char *)product);
- copy_trim(tpec_version, sizeof(tpec_version),
- (const unsigned char *)version);
- if (!str_eq(vendor, "LENOVO") && !str_eq(vendor, "IBM")) {
- log_info();
- serial_puts(SERIAL_COM1, ": not a ThinkPad vendor, no EC probe\n");
- return;
- }
- if (ec_read(TP_FAN_LEVEL, &probe) != 0) {
- log_info();
- serial_puts(SERIAL_COM1, ": EC not responding\n");
- return;
- }
- if (ec_read(TP_EC_REV, &rev) == 0)
- tpec_ec_rev = rev;
- tpec_state = 1;
- log_info();
- serial_puts(SERIAL_COM1, ": EC ok, fw rev ");
- serial_putdec(SERIAL_COM1, tpec_ec_rev);
- serial_puts(SERIAL_COM1, ", fan level 0x");
- serial_puthex(SERIAL_COM1, probe);
- serial_puts(SERIAL_COM1, "\n");
- }
- void tpec_read(struct tpec_info *out)
- {
- unsigned char b;
- unsigned int i;
- out->present = 0;
- out->vendor[0] = '\0';
- out->product[0] = '\0';
- out->version[0] = '\0';
- for (i = 0; i < TPEC_TEMP_COUNT; i++)
- out->temp_c[i] = -128;
- out->fan_rpm = 0;
- out->fan_level = 0;
- if (tpec_state < 0)
- tpec_init();
- if (!tpec_state)
- return;
- out->present = 1;
- for (i = 0; i < sizeof(out->vendor) - 1 && tpec_vendor[i]; i++)
- out->vendor[i] = tpec_vendor[i];
- out->vendor[i] = '\0';
- for (i = 0; i < sizeof(out->product) - 1 && tpec_product[i]; i++)
- out->product[i] = tpec_product[i];
- out->product[i] = '\0';
- for (i = 0; i < sizeof(out->version) - 1 && tpec_version[i]; i++)
- out->version[i] = tpec_version[i];
- out->version[i] = '\0';
- for (i = 0; i < 8; i++) {
- if (ec_read((unsigned char)(TP_TEMP_LO + i), &b) != 0)
- continue;
- /* 0x80 = sensor present but unavailable, 0x00 = register not
- * implemented (thinkpad_acpi treats a block of zeros as an EC
- * that does not expose the register map at all). */
- if (b != 0x80 && b != 0x00)
- out->temp_c[i] = (signed char)b;
- }
- /* EC functional revision 3 and later only uses 0x78..0x7F; the 0xC0
- * block may hold unrelated values (e.g. a power supply ID) there. */
- if (tpec_ec_rev < 3) {
- for (i = 0; i < 8; i++) {
- if (ec_read((unsigned char)(TP_TEMP_HI + i), &b) != 0)
- continue;
- if (b != 0x80 && b != 0x00)
- out->temp_c[8 + i] = (signed char)b;
- }
- }
- {
- unsigned char lo = 0, hi = 0;
- if (ec_read(TP_FAN_LSB, &lo) == 0 &&
- ec_read(TP_FAN_MSB, &hi) == 0) {
- if (!(lo == 0xFF && hi == 0xFF))
- out->fan_rpm = ((unsigned int)hi << 8) | lo;
- }
- }
- if (ec_read(TP_FAN_LEVEL, &b) == 0)
- out->fan_level = b;
- }
|