| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173 |
- /* kexec: receive a new kernel.bin over serial and jump into it.
- *
- * C-light reload: we do NOT return to real mode or re-run the VESA stage.
- * Instead we reuse the current framebuffer (the boot FB info at 0x600 and the
- * LFB are still valid) and jump straight to the new kernel's kernel_main,
- * which re-inits IDT/PIC/PIT/mouse/process/VGA-shadow/terminal from scratch.
- *
- * Because this code lives at 0x7E00..0x30000 (inside the region we overwrite),
- * the final "copy image to 0x7E00 and jump" is done by a small
- * position-independent trampoline relocated to 0x800 (below the kernel).
- *
- * The terminal polls kexec_pending() on its idle loop, so `make dev` on the
- * host alone triggers the reload (no typing required). The manual `kexec`
- * command is kept as a fallback that waits for the same image.
- *
- * Wire protocol (host -> us):
- * 4 bytes: magic "KXEC" (LE)
- * 4 bytes: entry address (LE) -- new kernel_main VMA
- * 4 bytes: size (LE) -- kernel.bin byte count
- * N bytes: kernel.bin data
- * 1 byte: checksum (sum of data bytes mod 256)
- */
- #include "kexec.h"
- #include "io.h"
- #include "serial.h"
- #define KEXEC_MAGIC 0x4345584B /* "KXEC" little-endian */
- #define KEXEC_STAGE 0x50000 /* staging buffer for the received image */
- #define KEXEC_LOAD 0x7E00 /* where the kernel must be placed */
- #define KEXEC_TRAMP 0x800 /* relocated trampoline (below the kernel) */
- #define KEXEC_MAX 0x28200 /* max = kernel region 0x7E00..0x30000 */
- volatile int kexec_busy;
- volatile unsigned int kexec_progress;
- volatile unsigned int kexec_total;
- extern unsigned char kexec_trampoline[];
- extern unsigned char kexec_trampoline_end[];
- int kexec_pending(void)
- {
- unsigned char b, x, e, c;
- /* Scan for the "KXEC" magic, draining any leading bytes that can't begin
- * it. This self-heals after a stray/partial/overflowed transfer, so stale
- * bytes in the ring buffer can never permanently block detection. */
- for (;;) {
- if (!serial_ring_peek(0, &b))
- return 0; /* buffer empty */
- if (b != 'K') {
- (void)serial_ring_getc(); /* stale byte, drop it */
- continue;
- }
- /* First byte is 'K'. Report pending only once all 4 bytes are here. */
- if (serial_ring_peek(1, &x) && serial_ring_peek(2, &e) &&
- serial_ring_peek(3, &c)) {
- if (x == 'X' && e == 'E' && c == 'C')
- return 1; /* "KXEC" found */
- (void)serial_ring_getc(); /* false 'K' start, drop it */
- continue;
- }
- return 0; /* 'K' seen but magic incomplete; wait */
- }
- }
- /* Drain whatever partial data remains in the ring buffer after a failure so a
- * subsequent attempt starts clean. */
- static void kexec_drain(void)
- {
- while (serial_has_data(SERIAL_COM1))
- (void)serial_ring_getc();
- }
- static int kexec_fail(const char *msg)
- {
- if (msg)
- io_putstr(msg);
- kexec_drain();
- return -1;
- }
- static int kexec_recv(unsigned int *entry, unsigned int *size)
- {
- volatile unsigned char *dst = (volatile unsigned char *)KEXEC_STAGE;
- unsigned int i, magic = 0, n;
- unsigned char c, sum = 0, chk;
- for (i = 0; i < 4; i++) {
- if (!serial_ring_wait(5000, &c))
- return kexec_fail("kexec: timeout (magic)\n");
- magic |= (unsigned int)c << (8 * i);
- }
- if (magic != KEXEC_MAGIC)
- return kexec_fail("kexec: bad magic\n");
- *entry = 0;
- for (i = 0; i < 4; i++) {
- if (!serial_ring_wait(5000, &c))
- return kexec_fail("kexec: timeout (entry)\n");
- *entry |= (unsigned int)c << (8 * i);
- }
- *size = 0;
- for (i = 0; i < 4; i++) {
- if (!serial_ring_wait(5000, &c))
- return kexec_fail("kexec: timeout (size)\n");
- *size |= (unsigned int)c << (8 * i);
- }
- if (*size == 0 || *size > KEXEC_MAX)
- return kexec_fail("kexec: bad size\n");
- kexec_total = *size;
- kexec_progress = 0;
- for (n = 0; n < *size; n++) {
- if (!serial_ring_wait(5000, &c))
- return kexec_fail("kexec: timeout (data)\n");
- dst[n] = c;
- sum += c;
- kexec_progress = n + 1;
- if ((n & 0xFFF) == 0xFFF)
- io_putchar('.');
- }
- io_putchar('\n');
- if (!serial_ring_wait(5000, &chk))
- return kexec_fail("kexec: timeout (checksum)\n");
- if (chk != sum)
- return kexec_fail("kexec: checksum mismatch\n");
- return 0;
- }
- void program_kexec_main(void)
- {
- unsigned int entry = 0, size = 0;
- io_putstr("kexec: waiting for kernel image over serial...\n");
- if (kexec_recv(&entry, &size) != 0) {
- io_putstr("kexec: aborted\n");
- kexec_busy = 0;
- return;
- }
- io_putstr("kexec: received ");
- io_puthex(size);
- io_putstr(" bytes, entry ");
- io_puthex(entry);
- io_putstr("\n");
- /* Relocate the trampoline to 0x800 so it survives the kernel overwrite. */
- {
- const void *s = (const void *)kexec_trampoline;
- void *d = (void *)KEXEC_TRAMP;
- unsigned int n = (unsigned int)(kexec_trampoline_end - kexec_trampoline);
- __asm__ volatile (
- "cld\n\t"
- "rep movsb"
- : "+S"(s), "+D"(d), "+c"(n)
- :
- : "memory");
- }
- /* Serialize so the freshly-written trampoline is visible to fetch. */
- __asm__ volatile ("cpuid" ::: "eax", "ebx", "ecx", "edx");
- /* Jump to the trampoline with args in eax/ebx/ecx/edx. Never returns. */
- __asm__ volatile (
- "jmp *%4"
- :
- : "a"(KEXEC_STAGE), "b"(KEXEC_LOAD), "c"(size), "d"(entry), "r"(KEXEC_TRAMP)
- : "memory");
- }
|