| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686 |
- /* OHCI (USB 1.1) host controller driver.
- Memory-mapped (BAR0) controller with ED/TD lists in the identity-mapped
- kernel address space. Polling based (no IRQ): control transfers run on
- the control list and are monitored by polling each TD's condition code;
- the mouse's interrupt-IN endpoint is a single always-armed TD linked into
- every HCCA interrupt-table slot (F = 0 means "every frame"), so the
- controller retries NAKs on its own and software only harvests reports.
- Up to four controller instances (MCP79 exposes four of them); each PCI
- function is one root hub with its own device address space. */
- #include "usb.h"
- #include "ohci.h"
- #include "usb_hcd.h"
- #include "pci.h"
- #include "paging.h"
- #include "mm.h"
- #include "serial.h"
- #include "timer.h"
- /* Register offsets. */
- #define R_REVISION 0x00
- #define R_CONTROL 0x04
- #define R_COMMAND 0x08
- #define R_INT_STATUS 0x0C
- #define R_INT_ENABLE 0x10
- #define R_INT_DISABLE 0x14
- #define R_HCCA 0x18
- #define R_PERIOD_CUR_ED 0x1C
- #define R_CTRL_HEAD_ED 0x20
- #define R_CTRL_CUR_ED 0x24
- #define R_BULK_HEAD_ED 0x28
- #define R_BULK_CUR_ED 0x2C
- #define R_DONE_HEAD 0x30
- #define R_FM_INTERVAL 0x34
- #define R_FM_REMAINING 0x38
- #define R_FM_NUMBER 0x3C
- #define R_PERIODIC_START 0x40
- #define R_LS_THRESHOLD 0x44
- #define R_RH_DESC_A 0x48
- #define R_RH_DESC_B 0x4C
- #define R_RH_STATUS 0x50
- #define R_RH_PORT_FIRST 0x54
- /* R_CONTROL bits. */
- #define CTL_PLE 0x00000004u
- #define CTL_CLE 0x00000010u
- #define CTL_BLE 0x00000020u
- #define CTL_HCFS 0x000000C0u
- #define HCFS_RESUME 0x00000040u
- #define HCFS_OPER 0x00000080u
- /* R_COMMAND bits. */
- #define CMD_HCR 0x00000001u
- #define CMD_CLF 0x00000002u
- /* R_INT_STATUS bits. */
- #define INTR_WDH 0x00000002u
- /* R_RH_DESC_A bits. */
- #define RHA_PSM 0x00000100u
- #define RHA_NPS 0x00000200u
- #define RHA_POTPGT 0xFF000000u
- #define RHA_NDP 0x000000FFu
- /* R_RH_STATUS bits. */
- #define RHS_LPSC 0x00010000u
- /* R_RH_DESC_B: PortPowerControlMask (which ports are individually
- switched when PSM is set). */
- #define RHB_PPCM 0xFFFF0000u
- /* Root hub port status bits. */
- #define PS_CCS 0x00000001u
- #define PS_PES 0x00000002u
- #define PS_PRS 0x00000010u
- #define PS_PPS 0x00000100u /* port power (write 1 to switch power on) */
- #define PS_LSDA 0x00000200u
- #define PS_CSC 0x00010000u
- #define PS_PESC 0x00020000u
- #define PS_PRSC 0x00100000u
- #define PS_WTC (PS_CSC | PS_PESC | PS_PRSC)
- /* Endpoint descriptor (ED) fields. */
- #define ED_FA(a) ((a) & 0x7Fu)
- #define ED_EN(e) (((e) & 0xFu) << 7)
- #define ED_S (1u << 13)
- #define ED_MPS(m) (((m) & 0x7FFu) << 16)
- #define ED_PTR_MASK 0xFFFFFFF0u
- #define ED_H 0x00000001u /* head pointer: halted */
- #define ED_C 0x00000002u /* head pointer: data-toggle carry */
- /* Transfer descriptor (TD) fields. */
- #define TD_R (1u << 18)
- #define TD_DP(d) (((d) & 3u) << 19)
- #define TD_DP_SETUP 0u
- #define TD_DP_OUT 1u
- #define TD_DP_IN 2u
- /* Data toggle field (bits 24-25): 10b = DATA0, 11b = DATA1. */
- #define TD_T_DATA0 0x02000000u
- #define TD_T_DATA1 0x03000000u
- #define TD_CC_SHIFT 28
- #define TD_CC_MASK 0xF0000000u
- #define TD_NOTACCESSED 0xFu
- /* PCI: class 0x0C (serial), subclass 0x03 (USB), prog.if 0x10 (OHCI). */
- #define PCI_USB_CLASS 0x0C03u
- #define OHCI_MAX_TD 16
- struct ohci_ed {
- unsigned int flags;
- unsigned int tail;
- unsigned int head;
- unsigned int next;
- } __attribute__((aligned(16)));
- struct ohci_td {
- unsigned int flags;
- unsigned int cbp;
- unsigned int next;
- unsigned int be;
- } __attribute__((aligned(16)));
- struct ohci_ctrl {
- volatile unsigned int *regs;
- unsigned int bus, dev, func, bar;
- unsigned int hcca;
- unsigned int ports;
- unsigned int potpgt;
- int nps;
- /* Interrupt-IN endpoints: slot 0 = mouse, slot 1 = keyboard. All
- slots stay linked into the periodic list; empty EDs are skipped
- by the controller. */
- struct ohci_ed int_ed[USB_HCD_INT_SLOTS];
- struct ohci_td int_td[USB_HCD_INT_SLOTS];
- struct ohci_td int_dummy[USB_HCD_INT_SLOTS];
- unsigned char int_buf[USB_HCD_INT_SLOTS][8] __attribute__((aligned(16)));
- unsigned int int_mps[USB_HCD_INT_SLOTS];
- unsigned int int_toggle[USB_HCD_INT_SLOTS];
- int int_armed[USB_HCD_INT_SLOTS];
- };
- static struct ohci_ctrl ctrls[USB_HCD_MAX_CTRL];
- static unsigned int n_ctrls;
- /* Control-transfer scratch: transfers are serialized, so one ED/TD set for
- all instances is enough. A dummy TD anchors the tail of each queue (the
- controller stops when HeadP == TailP; the dummy is never processed). */
- static struct ohci_ed ctrl_ed;
- static struct ohci_td ctrl_tds[OHCI_MAX_TD];
- static struct ohci_td ctrl_dummy;
- static unsigned char setup_buf[8] __attribute__((aligned(16)));
- static int ctl_busy;
- static void ohci_int_in_stop(unsigned int slot);
- static unsigned int rd(struct ohci_ctrl *c, unsigned int ofs)
- {
- return c->regs[ofs >> 2];
- }
- static void wr(struct ohci_ctrl *c, unsigned int ofs, unsigned int val)
- {
- c->regs[ofs >> 2] = val;
- }
- static void delay_ms(unsigned int ms)
- {
- usb_delay_ms(ms); /* sleeps inside a sleepable scan */
- }
- static unsigned int port_reg(unsigned int port)
- {
- return R_RH_PORT_FIRST + 4u * port;
- }
- static int ohci_setup_one(unsigned int bus, unsigned int dev, unsigned int func)
- {
- struct ohci_ctrl *c;
- unsigned int bar, cmd, rha, t0, i;
- if (n_ctrls >= USB_HCD_MAX_CTRL)
- return -1;
- bar = pci_cfg_read32(bus, dev, func, 0x10);
- if (bar & 0x1u) {
- serial_puts(SERIAL_COM1, "ohci: BAR0 is not MMIO\n");
- return -1; /* register block must be MMIO */
- }
- bar &= 0xFFFFFFF0u;
- if (!bar) {
- serial_puts(SERIAL_COM1, "ohci: BAR0 is unassigned\n");
- return -1;
- }
- cmd = pci_cfg_read32(bus, dev, func, 0x04);
- pci_cfg_write32(bus, dev, func, 0x04, cmd | 0x0006u); /* mem + bus master */
- /* Disable legacy SMI emulation (same idea as the UHCI driver). */
- pci_cfg_write16(bus, dev, func, 0xC0, 0);
- c = &ctrls[n_ctrls];
- c->regs = (volatile unsigned int *)bar;
- c->bus = bus;
- c->dev = dev;
- c->func = func;
- c->bar = bar;
- paging_map_mmio(bar, 0x1000);
- if (rd(c, R_REVISION) == 0xFFFFFFFFu || rd(c, R_REVISION) == 0) {
- serial_puts(SERIAL_COM1, "ohci: no register response (rev ");
- serial_puthex(SERIAL_COM1, rd(c, R_REVISION));
- serial_puts(SERIAL_COM1, ")\n");
- return -1;
- }
- c->hcca = mm_alloc_page();
- if (!c->hcca) {
- serial_puts(SERIAL_COM1, "ohci: no memory for HCCA\n");
- return -1;
- }
- for (i = 0; i < 1024; i++)
- ((unsigned int *)c->hcca)[i] = 0;
- /* Periodic list: the interrupt EDs are chained and referenced from
- every HCCA table slot (F = 0 means "every frame"). Idle queues
- are empty (HeadP == TailP == dummy) but carry valid ED fields. */
- for (i = 0; i < USB_HCD_INT_SLOTS; i++) {
- c->int_ed[i].flags = ED_FA(0) | ED_EN(0) | ED_MPS(8);
- c->int_ed[i].tail = (unsigned int)&c->int_dummy[i];
- c->int_ed[i].head = (unsigned int)&c->int_dummy[i];
- c->int_ed[i].next = (i + 1 < USB_HCD_INT_SLOTS)
- ? (unsigned int)&c->int_ed[i + 1] : 0;
- c->int_dummy[i].flags = TD_NOTACCESSED << TD_CC_SHIFT;
- c->int_dummy[i].cbp = 0;
- c->int_dummy[i].next = 0;
- c->int_dummy[i].be = 0;
- c->int_armed[i] = 0;
- }
- for (i = 0; i < 32; i++)
- ((unsigned int *)c->hcca)[i] = (unsigned int)&c->int_ed[0];
- /* Host controller reset. */
- wr(c, R_COMMAND, CMD_HCR);
- t0 = get_ticks_ms();
- while (rd(c, R_COMMAND) & CMD_HCR) {
- if (get_ticks_ms() - t0 > 100)
- break;
- }
- delay_ms(2);
- /* Standard frame timing (12 MHz / 1 kHz - 1) and list setup. */
- wr(c, R_FM_INTERVAL, (0x2778u << 16) | 0x2EDFu);
- wr(c, R_PERIODIC_START, 0x2A2Fu);
- wr(c, R_LS_THRESHOLD, 0x628u);
- wr(c, R_HCCA, c->hcca);
- wr(c, R_INT_DISABLE, 0xFFFFFFFFu);
- wr(c, R_INT_STATUS, 0xFFFFFFFFu); /* clear pending */
- wr(c, R_DONE_HEAD, 0);
- /* Root hub: port count and power. */
- rha = rd(c, R_RH_DESC_A);
- c->ports = rha & RHA_NDP;
- if (c->ports > 15)
- c->ports = 15;
- if (c->ports == 0) {
- serial_puts(SERIAL_COM1, "ohci: no downstream ports\n");
- return -1;
- }
- c->nps = (rha & RHA_NPS) ? 1 : 0;
- c->potpgt = (rha & RHA_POTPGT) >> 24;
- if (!c->nps) {
- /* Power switching is implemented: mark every port as
- individually switchable, raise global power and switch on
- each port, then let the supply settle (POTPGT in 2 ms
- units). */
- wr(c, R_RH_DESC_B, RHB_PPCM);
- wr(c, R_RH_STATUS, RHS_LPSC);
- for (i = 0; i < c->ports; i++)
- wr(c, port_reg(i), PS_PPS);
- delay_ms(c->potpgt * 2 + 20);
- } else {
- delay_ms(20);
- }
- /* Leave reset (spec: via USBRESUME) and enter operational with the
- periodic + control lists enabled. */
- wr(c, R_CONTROL, HCFS_RESUME);
- delay_ms(20);
- wr(c, R_CONTROL, HCFS_OPER | CTL_PLE | CTL_CLE);
- n_ctrls++;
- {
- unsigned int conn = 0, pwr = 0, st;
- for (i = 0; i < c->ports; i++) {
- st = rd(c, port_reg(i));
- if (st & PS_CCS)
- conn++;
- if (st & PS_PPS)
- pwr++;
- }
- serial_puts(SERIAL_COM1, "ohci: controller at ");
- serial_putdec(SERIAL_COM1, bus);
- serial_puts(SERIAL_COM1, ":");
- serial_putdec(SERIAL_COM1, dev);
- serial_puts(SERIAL_COM1, ".");
- serial_putdec(SERIAL_COM1, func);
- serial_puts(SERIAL_COM1, " ports ");
- serial_putdec(SERIAL_COM1, c->ports);
- serial_puts(SERIAL_COM1, " psm ");
- serial_putdec(SERIAL_COM1, (rha & RHA_PSM) ? 1u : 0u);
- serial_puts(SERIAL_COM1, " nps ");
- serial_putdec(SERIAL_COM1, (unsigned int)c->nps);
- serial_puts(SERIAL_COM1, " potpgt ");
- serial_putdec(SERIAL_COM1, c->potpgt);
- serial_puts(SERIAL_COM1, " conn ");
- serial_putdec(SERIAL_COM1, conn);
- serial_puts(SERIAL_COM1, " pwr ");
- serial_putdec(SERIAL_COM1, pwr);
- serial_puts(SERIAL_COM1, "\n");
- }
- return 0;
- }
- static int ohci_init(void)
- {
- unsigned int bus, dev, func;
- if (n_ctrls)
- return (int)n_ctrls;
- for (bus = 0; bus < 256 && n_ctrls < USB_HCD_MAX_CTRL; bus++) {
- for (dev = 0; dev < 32; dev++) {
- for (func = 0; func < 8; func++) {
- unsigned int id = pci_cfg_read32(bus, dev, func, 0x00);
- unsigned int class_rev;
- if (id == 0xFFFFFFFFu || id == 0)
- continue;
- class_rev = pci_cfg_read32(bus, dev, func, 0x08);
- if ((class_rev >> 16) != PCI_USB_CLASS)
- continue;
- if (((class_rev >> 8) & 0xFFu) != 0x10u)
- continue; /* not OHCI */
- ohci_setup_one(bus, dev, func);
- }
- }
- }
- return (int)n_ctrls;
- }
- static unsigned int ohci_count(void)
- {
- return n_ctrls;
- }
- static void ohci_info(unsigned int ctrl, unsigned int *bus, unsigned int *dev,
- unsigned int *func, unsigned int *base, int *mmio)
- {
- struct ohci_ctrl *c = &ctrls[ctrl];
- *bus = c->bus;
- *dev = c->dev;
- *func = c->func;
- *base = c->bar;
- *mmio = 1;
- }
- static unsigned int ohci_port_count(unsigned int ctrl)
- {
- return ctrls[ctrl].ports;
- }
- static int ohci_port_connected(unsigned int ctrl, unsigned int port)
- {
- return (rd(&ctrls[ctrl], port_reg(port)) & PS_CCS) ? 1 : 0;
- }
- static int ohci_port_low_speed(unsigned int ctrl, unsigned int port)
- {
- return (rd(&ctrls[ctrl], port_reg(port)) & PS_LSDA) ? 1 : 0;
- }
- static int ohci_port_take_change(unsigned int ctrl, unsigned int port)
- {
- struct ohci_ctrl *c = &ctrls[ctrl];
- unsigned int ofs = port_reg(port);
- if (!(rd(c, ofs) & PS_CSC))
- return 0;
- wr(c, ofs, PS_CSC); /* write-1-to-clear */
- return 1;
- }
- static int ohci_port_reset(unsigned int ctrl, unsigned int port)
- {
- struct ohci_ctrl *c = &ctrls[ctrl];
- unsigned int ofs = port_reg(port);
- unsigned int t0, st;
- if (!(rd(c, ofs) & PS_CCS))
- return -1;
- /* Clear stale change bits. */
- wr(c, ofs, PS_WTC);
- /* Assert reset; the controller clears PRS when the reset finishes
- (at least 10 ms for the device to see it). */
- wr(c, ofs, PS_PRS);
- t0 = get_ticks_ms();
- for (;;) {
- if (!(rd(c, ofs) & PS_PRS))
- break;
- if (get_ticks_ms() - t0 > 200)
- return -1;
- }
- delay_ms(10);
- /* Acknowledge reset-complete and make sure the port is enabled. */
- wr(c, ofs, PS_PRSC | PS_CSC | PS_PESC);
- wr(c, ofs, PS_PES);
- st = rd(c, ofs);
- if (!(st & PS_CCS) || !(st & PS_PES))
- return -1;
- return 0;
- }
- static void td_set(struct ohci_td *td, unsigned int flags, unsigned int cbp,
- unsigned int be)
- {
- td->flags = flags | (TD_NOTACCESSED << TD_CC_SHIFT);
- td->cbp = cbp;
- td->next = 0;
- td->be = be;
- }
- static int ohci_transfer(struct ohci_ctrl *c, unsigned int addr,
- unsigned int mps, int low,
- const unsigned char *setup, unsigned char *data,
- unsigned int len, int dir_in)
- {
- unsigned int i, n = 0, n_data = 0, t0;
- if (mps == 0 || mps > 64)
- mps = 64;
- for (i = 0; i < 8; i++)
- setup_buf[i] = setup[i];
- /* SETUP stage (DATA0). */
- td_set(&ctrl_tds[n++], TD_DP(TD_DP_SETUP) | TD_T_DATA0,
- (unsigned int)setup_buf, (unsigned int)setup_buf + 7);
- /* DATA stage: one TD for the whole buffer, DATA1 (like Linux; the
- controller splits it into MPS-sized packets itself). */
- if (len > 0) {
- td_set(&ctrl_tds[n++],
- TD_R | TD_DP(dir_in ? TD_DP_IN : TD_DP_OUT) |
- TD_T_DATA1,
- (unsigned int)data, (unsigned int)(data + len - 1));
- n_data = 1;
- }
- /* STATUS stage (DATA1, opposite direction, no data). */
- td_set(&ctrl_tds[n++],
- TD_DP(dir_in ? TD_DP_OUT : TD_DP_IN) | TD_T_DATA1, 0, 0);
- /* Chain the TDs and anchor the tail on the dummy TD. */
- for (i = 0; i + 1 < n; i++)
- ctrl_tds[i].next = (unsigned int)&ctrl_tds[i + 1];
- ctrl_tds[n - 1].next = (unsigned int)&ctrl_dummy;
- ctrl_dummy.flags = TD_NOTACCESSED << TD_CC_SHIFT;
- ctrl_dummy.cbp = 0;
- ctrl_dummy.next = 0;
- ctrl_dummy.be = 0;
- ctrl_ed.flags = ED_FA(addr) | ED_EN(0) | ED_MPS(mps) | (low ? ED_S : 0);
- ctrl_ed.tail = (unsigned int)&ctrl_dummy;
- ctrl_ed.head = (unsigned int)&ctrl_tds[0];
- ctrl_ed.next = 0;
- wr(c, R_CTRL_HEAD_ED, (unsigned int)&ctrl_ed);
- wr(c, R_COMMAND, CMD_CLF);
- /* Poll until every TD has left "not accessed". A NAKed TD stays
- untouched and is retried by the controller next frame. */
- t0 = get_ticks_ms();
- for (;;) {
- int done = 1, err = 0;
- for (i = 0; i < n; i++) {
- unsigned int cc = (ctrl_tds[i].flags & TD_CC_MASK)
- >> TD_CC_SHIFT;
- if (cc == TD_NOTACCESSED) {
- done = 0;
- continue;
- }
- if (cc != 0) {
- err = 1;
- serial_puts(SERIAL_COM1, "ohci: xfer err td ");
- serial_putdec(SERIAL_COM1, i);
- serial_puts(SERIAL_COM1, " cc ");
- serial_putdec(SERIAL_COM1, cc);
- serial_putc(SERIAL_COM1, '\n');
- }
- }
- if (err) {
- ctrl_ed.head = (unsigned int)&ctrl_dummy;
- wr(c, R_CTRL_HEAD_ED, 0);
- return -1;
- }
- if (done)
- break;
- if (get_ticks_ms() - t0 > 2000) {
- serial_puts(SERIAL_COM1, "ohci: xfer timeout\n");
- ctrl_ed.head = (unsigned int)&ctrl_dummy;
- wr(c, R_CTRL_HEAD_ED, 0);
- return -1;
- }
- }
- ctrl_ed.head = (unsigned int)&ctrl_dummy;
- wr(c, R_CTRL_HEAD_ED, 0);
- /* Bytes actually received: the TD's CBP advances with the data
- (the controller clears it to 0 when the whole buffer arrived). */
- if (len > 0 && dir_in && n_data == 1) {
- unsigned int cbp = ctrl_tds[1].cbp;
- if (cbp == 0)
- return (int)len;
- return (int)(cbp - (unsigned int)data);
- }
- return (int)len;
- }
- static int ohci_control_transfer(unsigned int ctrl, unsigned int addr,
- unsigned int mps, int low_speed,
- const unsigned char *setup,
- unsigned char *data, unsigned int len,
- int dir_in)
- {
- int r;
- if (ctrl >= n_ctrls || ctl_busy)
- return -1;
- ctl_busy = 1;
- r = ohci_transfer(&ctrls[ctrl], addr, mps, low_speed, setup, data, len,
- dir_in);
- ctl_busy = 0;
- return r;
- }
- /* Arm one interrupt TD of one slot: (re)write it active. Only call with
- the TD retired. The ED stays linked in the periodic chain. */
- static void ohci_int_arm(struct ohci_ctrl *c, unsigned int slot)
- {
- c->int_td[slot].flags = (TD_NOTACCESSED << TD_CC_SHIFT) | TD_R |
- TD_DP(TD_DP_IN) |
- (c->int_toggle[slot] ? TD_T_DATA1
- : TD_T_DATA0);
- c->int_td[slot].cbp = (unsigned int)c->int_buf[slot];
- c->int_td[slot].next = (unsigned int)&c->int_dummy[slot];
- c->int_td[slot].be = (unsigned int)c->int_buf[slot] +
- c->int_mps[slot] - 1;
- c->int_ed[slot].head = (unsigned int)&c->int_td[slot] |
- (c->int_toggle[slot] ? ED_C : 0);
- c->int_ed[slot].tail = (unsigned int)&c->int_dummy[slot];
- /* int_ed[slot].next keeps the chain to the other slots. */
- c->int_armed[slot] = 1;
- }
- static int ohci_int_in_start(unsigned int ctrl, unsigned int slot,
- unsigned int addr, unsigned int ep,
- unsigned int mps, int low_speed)
- {
- struct ohci_ctrl *c;
- if (ctrl >= n_ctrls || slot >= USB_HCD_INT_SLOTS)
- return -1;
- c = &ctrls[ctrl];
- ohci_int_in_stop(slot);
- c->int_mps[slot] = mps ? mps : 8;
- c->int_ed[slot].flags = ED_FA(addr) | ED_EN(ep) |
- ED_MPS(c->int_mps[slot]) |
- (low_speed ? ED_S : 0);
- c->int_ed[slot].tail = (unsigned int)&c->int_dummy[slot];
- c->int_ed[slot].head = (unsigned int)&c->int_dummy[slot];
- c->int_toggle[slot] = 0; /* first report is DATA0 */
- ohci_int_arm(c, slot);
- return 0;
- }
- static int ohci_int_in_poll(unsigned int slot, unsigned char *buf,
- unsigned int len)
- {
- struct ohci_ctrl *c = 0;
- unsigned int i, cc, n;
- if (slot >= USB_HCD_INT_SLOTS)
- return 0;
- for (i = 0; i < n_ctrls; i++) {
- if (ctrls[i].int_armed[slot]) {
- c = &ctrls[i];
- break;
- }
- }
- if (!c)
- return 0;
- cc = (c->int_td[slot].flags & TD_CC_MASK) >> TD_CC_SHIFT;
- if (cc == TD_NOTACCESSED) {
- if (c->int_ed[slot].head & ED_H) {
- /* Halted by the controller without a CC update:
- clear it and stay armed. */
- ohci_int_arm(c, slot);
- return -1;
- }
- return 0; /* still queued; the controller retries NAKs */
- }
- if (cc != 0) {
- /* Report the error but stay armed (toggle preserved). */
- ohci_int_arm(c, slot);
- return -1;
- }
- n = c->int_td[slot].cbp
- ? (c->int_td[slot].cbp - (unsigned int)c->int_buf[slot])
- : c->int_mps[slot];
- if (n > len)
- n = len;
- for (i = 0; i < n; i++)
- buf[i] = c->int_buf[slot][i];
- c->int_toggle[slot] ^= 1u;
- ohci_int_arm(c, slot);
- return (int)n;
- }
- static void ohci_int_in_stop(unsigned int slot)
- {
- unsigned int i;
- if (slot >= USB_HCD_INT_SLOTS)
- return;
- for (i = 0; i < n_ctrls; i++) {
- struct ohci_ctrl *c = &ctrls[i];
- if (!c->int_armed[slot])
- continue;
- c->int_armed[slot] = 0;
- c->int_ed[slot].head = (unsigned int)&c->int_dummy[slot];
- c->int_ed[slot].tail = (unsigned int)&c->int_dummy[slot];
- }
- }
- const struct usb_hcd_ops usb_ohci_ops = {
- "OHCI",
- ohci_init,
- ohci_count,
- ohci_info,
- ohci_control_transfer,
- ohci_port_count,
- ohci_port_connected,
- ohci_port_low_speed,
- ohci_port_reset,
- ohci_port_take_change,
- ohci_int_in_start,
- ohci_int_in_poll,
- ohci_int_in_stop,
- 0,
- 0,
- 0,
- };
|