switch.S 2.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899
  1. /*
  2. * Context-switch PIT IRQ stub.
  3. *
  4. * On entry the CPU has already pushed EFLAGS, CS, EIP onto the
  5. * current process's stack. We save the rest, bump the tick counter,
  6. * and -- when the timeslice expires -- call schedule() and swap ESP
  7. * to the next process.
  8. *
  9. * Shadow buffer flush: every ~33 ticks (30Hz), set pending flag.
  10. * Main loop checks dirty rows and copies only what changed.
  11. *
  12. * Serial poll: every tick, check UART for received data and push
  13. * to ring buffer so no bytes are lost during preemption.
  14. */
  15. .code32
  16. .text
  17. .extern ticks
  18. .extern current_pid
  19. .extern procs
  20. .extern schedule
  21. .extern vga_shadow_flush_pending
  22. .extern serial_poll
  23. .extern tss
  24. /* struct process offsets (must match process.h / process.c) */
  25. .equ PCB_ESP, 0
  26. .equ PCB_CR3, 32
  27. .equ PCB_KSTACK_TOP, 36
  28. .equ PCB_SIZE, 40 /* sizeof(struct process): 4+4+4+12+4+4+4+4 = 40 */
  29. .equ TIMESLICE, 20
  30. .equ FLUSH_INTERVAL, 33 /* 1000Hz PIT / 30Hz flush ≈ 33 ticks */
  31. .globl pit_irq_stub
  32. pit_irq_stub:
  33. pusha
  34. /* Load the kernel data segment. The PIT can fire while a ring-3 process
  35. * is running, and in that case the CPU has switched CS/SS but left DS
  36. * null (IRET reset it when it returned to ring-3); the data accesses
  37. * below (ticks, counters, procs, tss) go through DS and would #GP. */
  38. movw $0x10, %ax
  39. movw %ax, %ds
  40. movw %ax, %es
  41. movw %ax, %fs
  42. movw %ax, %gs
  43. /* ticks++ and send EOI -- always, even when we don't switch. */
  44. incl ticks
  45. movb $0x20, %al
  46. outb %al, $0x20
  47. /* Poll UART for received serial data (prevents FIFO overflow). */
  48. call serial_poll
  49. /* Shadow buffer flush at 30Hz: set pending flag, main loop does the copy. */
  50. decl flush_counter
  51. jnz .no_flush
  52. movl $FLUSH_INTERVAL, flush_counter
  53. movl $1, vga_shadow_flush_pending
  54. .no_flush:
  55. /* Decrement timeslice counter; switch only when it reaches 0. */
  56. decl slice_counter
  57. jnz .no_switch
  58. /* Reset counter for next timeslice. */
  59. movl $TIMESLICE, slice_counter
  60. /* Save current ESP into procs[current_pid].esp (procs is a pointer). */
  61. movl current_pid, %eax
  62. imull $PCB_SIZE, %eax
  63. addl procs, %eax
  64. movl %esp, PCB_ESP(%eax)
  65. /* Let the C scheduler pick the next process. */
  66. call schedule
  67. /* Load new ESP, CR3, and TSS esp0 from procs[current_pid]. */
  68. movl current_pid, %eax
  69. imull $PCB_SIZE, %eax
  70. addl procs, %eax
  71. movl PCB_ESP(%eax), %esp
  72. movl PCB_CR3(%eax), %ebx
  73. movl %ebx, %cr3
  74. movl PCB_KSTACK_TOP(%eax), %ebx
  75. movl %ebx, tss+4 /* TSS.esp0 = this process's ring-0 stack top */
  76. .no_switch:
  77. popa
  78. iret
  79. .data
  80. .align 4
  81. slice_counter:
  82. .long TIMESLICE
  83. flush_counter:
  84. .long FLUSH_INTERVAL