| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454 |
- /* Chrome OS embedded controller: battery, AC adapter and board sensors.
- *
- * Chromebooks do not expose ACPI _BIF/_BST through an interpreter we could
- * run; instead the Chrome EC implements the standard ACPI EC command
- * interface at ports 0x62/0x66, and its ACPI memory window 0x20..0xFF
- * mirrors the EC memmap 0x00..0xDF. That gives us the same data the
- * firmware's DSDT reads:
- *
- * EC_MEMMAP_TEMP_SENSOR 0x00..0x0f temperatures (value + 200 = Kelvin)
- * EC_MEMMAP_FAN 0x10..0x17 fan tachometers (16-bit, 0xffff none)
- * EC_MEMMAP_TEMP_SENSOR_B 0x18..0x1f more temperatures (thermal version 2)
- * EC_MEMMAP_SWITCHES 0x30 lid open / power button
- * EC_MEMMAP_BATT_VOLT 0x40 present voltage (mV)
- * EC_MEMMAP_BATT_RATE 0x44 present rate (mA, ACPI power unit)
- * EC_MEMMAP_BATT_CAP 0x48 remaining capacity (mAh)
- * EC_MEMMAP_BATT_FLAG 0x4c AC/battery/charging state
- * EC_MEMMAP_BATT_COUNT 0x4d battery count
- * EC_MEMMAP_BATT_INDEX 0x4e selected battery
- * EC_MEMMAP_BATT_DCAP 0x50 design capacity (mAh)
- * EC_MEMMAP_BATT_DVLT 0x54 design voltage (mV)
- * EC_MEMMAP_BATT_LFCC 0x58 last full charge capacity (mAh)
- * EC_MEMMAP_BATT_CCNT 0x5c cycle count
- * EC_MEMMAP_BATT_MFGR/MODEL/SERIAL/TYPE 0x60..0x7f (8-byte strings)
- *
- * The battery index is selected through EC_ACPI_MEM_BATTERY_INDEX (0x12);
- * longer strings come from EC_ACPI_MEM_STRINGS_FIFO (0x16). The memmap is
- * read-only from the AP, so the only writes are the documented selector and
- * FIFO commands.
- *
- * The probe is gated on the EC ACPI version and the 'E','C' memmap id; the
- * ThinkPad backend is tried first and skips this one on Lenovo machines.
- */
- #include "cros_ec.h"
- #include "ec.h"
- #include "tpec.h"
- #include "serial.h"
- #define CROS_ACPI_VERSION 0x00
- #define CROS_ACPI_BATTERY_INDEX 0x12
- #define CROS_ACPI_STRINGS_FIFO 0x16
- #define CROS_ACPI_FAN_DUTY 0x04
- #define CROS_MEM_ACPI_BASE 0x20
- #define CROS_MEM_TEMP_SENSOR 0x00
- #define CROS_MEM_TEMP_SENSOR_B 0x18
- #define CROS_MEM_FAN 0x10
- #define CROS_MEM_ID 0x20
- #define CROS_MEM_ID_VERSION 0x22
- #define CROS_MEM_THERMAL_VERSION 0x23
- #define CROS_MEM_BATTERY_VERSION 0x24
- #define CROS_MEM_SWITCHES 0x30
- #define CROS_MEM_BATT_VOLT 0x40
- #define CROS_MEM_BATT_RATE 0x44
- #define CROS_MEM_BATT_CAP 0x48
- #define CROS_MEM_BATT_FLAG 0x4c
- #define CROS_MEM_BATT_COUNT 0x4d
- #define CROS_MEM_BATT_INDEX 0x4e
- #define CROS_MEM_BATT_DCAP 0x50
- #define CROS_MEM_BATT_DVLT 0x54
- #define CROS_MEM_BATT_LFCC 0x58
- #define CROS_MEM_BATT_CCNT 0x5c
- #define CROS_MEM_BATT_MFGR 0x60
- #define CROS_MEM_BATT_MODEL 0x68
- #define CROS_MEM_BATT_SERIAL 0x70
- /* EC_MEMMAP_BATT_FLAG bits. */
- #define CROS_BATT_AC_PRESENT 0x01
- #define CROS_BATT_PRESENT 0x02
- #define CROS_BATT_DISCHARGING 0x04
- #define CROS_BATT_CHARGING 0x08
- #define CROS_BATT_INVALID_DATA 0x20
- #define CROS_BATT_CUT_OFF 0x40
- /* EC_MEMMAP_SWITCHES bits. */
- #define CROS_SWITCH_LID_OPEN 0x01
- #define CROS_SWITCH_POWER_BUTTON 0x02
- /* Device feature bits (EC_ACPI_MEM_DEVICE_FEATURES, 8 bytes). */
- #define CROS_FEATURE_BATT (1u << 17)
- #define CROS_FEATURE_DFUD (1u << 0)
- #define CROS_UNKNOWN32 0xFFFFFFFFu
- #define CROS_TEMP_OFFSET 73 /* raw + 200 = Kelvin, so raw - 73 = C */
- static int cros_state = -1; /* -1 unprobed, 0 absent, 1 present */
- static unsigned int cros_acpi_version;
- static unsigned int cros_id_version;
- static unsigned int cros_battery_version;
- static unsigned int cros_thermal_version;
- static unsigned int cros_features;
- static int cros_fifo = -1; /* -1 unprobed, 0 absent, 1 present */
- static int mem_read(unsigned int off, unsigned char *out)
- {
- return ec_read((unsigned char)(CROS_MEM_ACPI_BASE + off), out);
- }
- static int mem_read16(unsigned int off, unsigned int *out)
- {
- unsigned char lo, hi;
- if (mem_read(off, &lo) != 0 || mem_read(off + 1, &hi) != 0)
- return -1;
- *out = (unsigned int)lo | ((unsigned int)hi << 8);
- return 0;
- }
- static int mem_read32(unsigned int off, unsigned int *out)
- {
- unsigned char b0, b1, b2, b3;
- if (mem_read(off, &b0) != 0 || mem_read(off + 1, &b1) != 0 ||
- mem_read(off + 2, &b2) != 0 || mem_read(off + 3, &b3) != 0)
- return -1;
- *out = (unsigned int)b0 | ((unsigned int)b1 << 8) |
- ((unsigned int)b2 << 16) | ((unsigned int)b3 << 24);
- return 0;
- }
- /* Read one of the 8-byte fixed strings from the memmap. */
- static void read_short_string(unsigned int off, char *dst, unsigned int size)
- {
- unsigned int i, n = 8;
- if (n > size - 1)
- n = size - 1;
- for (i = 0; i < n; i++) {
- unsigned char b;
- if (mem_read(off + i, &b) != 0)
- break;
- if (b == 0 || b == 0xFF)
- break;
- dst[i] = (char)b;
- }
- while (i && dst[i - 1] == ' ')
- i--;
- dst[i] = '\0';
- }
- /* Long strings from EC_ACPI_MEM_STRINGS_FIFO, when the EC supports them. */
- static void read_fifo_string(unsigned int id, char *dst, unsigned int size)
- {
- unsigned int i;
- if (ec_write(CROS_ACPI_STRINGS_FIFO, (unsigned char)id) != 0) {
- dst[0] = '\0';
- return;
- }
- for (i = 0; i + 1 < size; i++) {
- unsigned char b;
- if (ec_read(CROS_ACPI_STRINGS_FIFO, &b) != 0)
- break;
- if (b == 0)
- break;
- dst[i] = (char)b;
- }
- while (i && dst[i - 1] == ' ')
- i--;
- dst[i] = '\0';
- }
- static void read_string(unsigned int off, unsigned int fifo_id, char *dst,
- unsigned int size)
- {
- if (cros_fifo > 0) {
- read_fifo_string(fifo_id, dst, size);
- if (dst[0])
- return;
- }
- read_short_string(off, dst, size);
- }
- static int battery_select(unsigned int index)
- {
- unsigned char cur;
- unsigned int i;
- if (mem_read(CROS_MEM_BATT_INDEX, &cur) == 0 &&
- cur == (unsigned char)index)
- return 0;
- if (ec_write(CROS_ACPI_BATTERY_INDEX, (unsigned char)index) != 0)
- return -1;
- /* The DSDT's BTSW waits 5 ms for BTIX to follow BTID. Each read is
- * already several port handshakes, so a bounded retry is enough. */
- for (i = 0; i < 50; i++) {
- if (mem_read(CROS_MEM_BATT_INDEX, &cur) == 0 &&
- cur == (unsigned char)index)
- return 0;
- }
- return -1;
- }
- static void read_temp(unsigned int off, int *out)
- {
- unsigned char b;
- if (mem_read(off, &b) != 0 || b >= 0xFC) {
- *out = -128;
- return;
- }
- *out = (int)b - CROS_TEMP_OFFSET;
- }
- void cros_ec_init(void)
- {
- unsigned char ver = 0, id0 = 0, id1 = 0, b;
- unsigned int i, feature = 0;
- cros_state = 0;
- cros_acpi_version = 0;
- cros_id_version = 0;
- cros_battery_version = 0;
- cros_thermal_version = 0;
- cros_features = 0;
- cros_fifo = -1;
- /* The ThinkPad H8 has its own driver and the first claim on 0x62/0x66. */
- if (tpec_present()) {
- serial_puts(SERIAL_COM1, "cros_ec: ThinkPad EC present, skipped\n");
- return;
- }
- if (ec_read(CROS_ACPI_VERSION, &ver) != 0) {
- serial_puts(SERIAL_COM1, "cros_ec: no ACPI EC at 0x62/0x66\n");
- return;
- }
- if (mem_read(CROS_MEM_ID, &id0) != 0 ||
- mem_read(CROS_MEM_ID + 1, &id1) != 0 ||
- id0 != 'E' || id1 != 'C') {
- serial_puts(SERIAL_COM1, "cros_ec: no Chrome EC signature\n");
- return;
- }
- for (i = 0; i < 4; i++) {
- unsigned char f;
- if (mem_read(0x0A + i, &f) != 0) {
- feature = 0;
- break;
- }
- feature |= (unsigned int)f << (8 * i);
- }
- if (feature & CROS_FEATURE_DFUD)
- feature = 0;
- if (mem_read(CROS_MEM_ID_VERSION, &b) == 0)
- cros_id_version = b;
- if (mem_read(CROS_MEM_THERMAL_VERSION, &b) == 0)
- cros_thermal_version = b;
- if (mem_read(CROS_MEM_BATTERY_VERSION, &b) == 0)
- cros_battery_version = b;
- cros_acpi_version = ver;
- cros_features = feature;
- cros_state = 1;
- /* Probe the extended-string FIFO once (write 0, read the version). */
- {
- unsigned char fifo = 0xFF;
- if (ec_write(CROS_ACPI_STRINGS_FIFO, 0) == 0)
- (void)ec_read(CROS_ACPI_STRINGS_FIFO, &fifo);
- cros_fifo = (fifo >= 1 && fifo < 0xFF) ? 1 : 0;
- }
- serial_puts(SERIAL_COM1, "cros_ec: Chrome EC, ACPI v");
- serial_putdec(SERIAL_COM1, cros_acpi_version);
- serial_puts(SERIAL_COM1, ", id v");
- serial_putdec(SERIAL_COM1, cros_id_version);
- serial_puts(SERIAL_COM1, ", battery v");
- serial_putdec(SERIAL_COM1, cros_battery_version);
- serial_puts(SERIAL_COM1, ", thermal v");
- serial_putdec(SERIAL_COM1, cros_thermal_version);
- serial_puts(SERIAL_COM1, ", features ");
- serial_puthex(SERIAL_COM1, cros_features);
- serial_puts(SERIAL_COM1, ", fifo ");
- serial_puts(SERIAL_COM1, cros_fifo ? "yes" : "no");
- serial_puts(SERIAL_COM1, "\n");
- if (mem_read(CROS_MEM_BATT_COUNT, &b) == 0) {
- serial_puts(SERIAL_COM1, "cros_ec: batteries ");
- serial_putdec(SERIAL_COM1, b);
- serial_puts(SERIAL_COM1, ", feature batt ");
- serial_puts(SERIAL_COM1,
- (cros_features & CROS_FEATURE_BATT) ? "yes" : "no");
- serial_puts(SERIAL_COM1, "\n");
- }
- }
- int cros_ec_present(void)
- {
- if (cros_state < 0)
- cros_ec_init();
- return cros_state > 0;
- }
- void cros_ec_power_read(struct power_info *out, int detail)
- {
- unsigned int i, count;
- unsigned char flags = 0;
- unsigned char count_byte = 0;
- int ac = -1;
- for (i = 0; i < sizeof(*out); i++)
- ((unsigned char *)out)[i] = 0;
- out->ac_online = -1;
- if (cros_state < 0)
- cros_ec_init();
- if (!cros_state)
- return;
- out->present = 1;
- out->source = SYS_POWER_SRC_CROS;
- out->ec_rev = cros_acpi_version;
- if (mem_read(CROS_MEM_BATT_FLAG, &flags) == 0)
- ac = (flags & CROS_BATT_AC_PRESENT) ? 1 : 0;
- out->ac_online = ac;
- if (mem_read(CROS_MEM_BATT_COUNT, &count_byte) != 0 ||
- count_byte == 0 || count_byte > POWER_BATT_MAX)
- count = 1;
- else
- count = count_byte;
- for (i = 0; i < count; i++) {
- struct power_battery *b = &out->battery[i];
- unsigned int volt = 0, rate = 0, cap = 0, lfcc = 0;
- unsigned int design = 0, dvlt = 0, cycles = 0;
- unsigned int full;
- unsigned char f = 0;
- if (battery_select(i) != 0) {
- b->error = 1;
- continue;
- }
- if (mem_read(CROS_MEM_BATT_FLAG, &f) != 0) {
- b->error = 1;
- continue;
- }
- b->status = f;
- b->present = (f & CROS_BATT_PRESENT) ? 1 : 0;
- b->charging = (f & CROS_BATT_CHARGING) ? 1 : 0;
- b->discharging = (f & CROS_BATT_DISCHARGING) ? 1 : 0;
- if (f & (CROS_BATT_INVALID_DATA | CROS_BATT_CUT_OFF))
- b->error = 1;
- if (!b->present)
- continue;
- if (mem_read32(CROS_MEM_BATT_VOLT, &volt) != 0 ||
- mem_read32(CROS_MEM_BATT_RATE, &rate) != 0 ||
- mem_read32(CROS_MEM_BATT_CAP, &cap) != 0 ||
- mem_read32(CROS_MEM_BATT_LFCC, &lfcc) != 0)
- b->error = 1;
- if (volt != CROS_UNKNOWN32)
- b->voltage_mv = volt;
- if (rate != CROS_UNKNOWN32)
- b->rate = (int)rate;
- if (cap != CROS_UNKNOWN32)
- b->remaining = cap;
- if (lfcc != CROS_UNKNOWN32)
- b->full = lfcc;
- if (detail) {
- if (mem_read32(CROS_MEM_BATT_DCAP, &design) != 0 ||
- mem_read32(CROS_MEM_BATT_DVLT, &dvlt) != 0 ||
- mem_read32(CROS_MEM_BATT_CCNT, &cycles) != 0)
- b->error = 1;
- if (design != CROS_UNKNOWN32)
- b->design = design;
- if (cycles != CROS_UNKNOWN32)
- b->cycle_count = cycles;
- (void)dvlt; /* design voltage is informational */
- }
- /* _BIF declares mAh/mA on Chromebooks. */
- b->unit_known = 1;
- b->unit_mwh = 0;
- /* The Cyan DSDT compensates a full pack that the EC reports as
- * neither charging nor discharging while AC is present. */
- full = b->full ? b->full : b->design;
- if (ac > 0 && !(b->discharging && b->charging) && full &&
- b->remaining > full - full / 16 &&
- b->remaining < full + full / 16)
- b->remaining = full;
- if (full && b->remaining &&
- b->remaining <= full + full / 4) {
- unsigned int pct =
- (b->remaining * 100u + full / 2u) / full;
- if (pct > 100)
- pct = 100;
- b->percent = (int)pct;
- b->percent_valid = 1;
- }
- if (detail) {
- read_string(CROS_MEM_BATT_MFGR, 3, b->manufacturer,
- sizeof(b->manufacturer));
- read_string(CROS_MEM_BATT_MODEL, 1, b->model,
- sizeof(b->model));
- read_string(CROS_MEM_BATT_SERIAL, 2, b->serial,
- sizeof(b->serial));
- }
- out->battery_count++;
- }
- }
- void cros_ec_sensors_read(struct cros_ec_sensors *out)
- {
- unsigned int i;
- unsigned char b;
- for (i = 0; i < sizeof(*out); i++)
- ((unsigned char *)out)[i] = 0;
- for (i = 0; i < CROS_EC_TEMP_MAX; i++)
- out->temp_c[i] = -128;
- if (cros_state < 0)
- cros_ec_init();
- if (!cros_state)
- return;
- out->present = 1;
- out->acpi_version = cros_acpi_version;
- out->battery_version = cros_battery_version;
- out->thermal_version = cros_thermal_version;
- for (i = 0; i < 16; i++)
- read_temp(CROS_MEM_TEMP_SENSOR + i, &out->temp_c[i]);
- for (i = 0; i < 8; i++)
- read_temp(CROS_MEM_TEMP_SENSOR_B + i, &out->temp_c[16 + i]);
- for (i = 0; i < CROS_EC_FAN_MAX; i++) {
- unsigned int v;
- if (mem_read16(CROS_MEM_FAN + 2 * i, &v) == 0 &&
- v != 0xFFFF) {
- out->fan_rpm[i] = v;
- out->fan_present |= 1u << i;
- }
- }
- if (ec_read(CROS_ACPI_FAN_DUTY, &b) == 0)
- out->fan_duty = b;
- if (mem_read(CROS_MEM_SWITCHES, &b) == 0)
- out->switches = b;
- }
|