/* Serial (UART) driver: COM1 at 0x3F8, 115200 8N1, polled. */ #include "serial.h" #include "timer.h" #define COM1_BASE 0x3F8 #define RBR 0 /* Receive Buffer (DLAB=0) */ #define THR 0 /* Transmit Holding (DLAB=0) */ #define DLL 0 /* Divisor Latch Low (DLAB=1) */ #define IER 1 /* Interrupt Enable */ #define DLH 1 /* Divisor Latch High (DLAB=1) */ #define LCR 3 /* Line Control */ #define LSR 5 /* Line Status */ #define LCR_8N1 0x03 #define LCR_DLAB 0x80 #define LSR_DR 0x01 /* Data Ready */ #define LSR_THRE 0x20 /* Transmit Holding Register Empty */ static inline unsigned char inb(unsigned short port) { unsigned char v; __asm__ volatile ("inb %1, %0" : "=a"(v) : "Nd"(port)); return v; } static inline void outb(unsigned short port, unsigned char v) { __asm__ volatile ("outb %0, %1" : : "a"(v), "Nd"(port)); } void serial_init(void) { /* Divisor for 115200: 115200 / 115200 = 1. Use 1. */ outb(COM1_BASE + LCR, LCR_DLAB); outb(COM1_BASE + DLL, 1); outb(COM1_BASE + DLH, 0); outb(COM1_BASE + LCR, LCR_8N1); outb(COM1_BASE + IER, 0); /* No interrupts */ } void serial_drain(void) { while (serial_getchar(0) >= 0) ; } void serial_putchar(char c) { unsigned int t0 = get_ticks_ms(); while ((get_ticks_ms() - t0) < 100) { if (inb(COM1_BASE + LSR) & LSR_THRE) { outb(COM1_BASE + THR, (unsigned char)c); return; } } } void serial_putstr(const char *s) { while (*s) serial_putchar(*s++); } int serial_getchar(unsigned int timeout_ms) { unsigned int t0 = get_ticks_ms(); while ((get_ticks_ms() - t0) < timeout_ms) { if (inb(COM1_BASE + LSR) & LSR_DR) return (unsigned char)inb(COM1_BASE + RBR); } return -1; } int serial_has_byte(void) { return (inb(COM1_BASE + LSR) & LSR_DR) ? 1 : 0; }