/* Kernel: entry point at 0x7E00, timer (PIT 1 kHz), process init, terminal. */ #include "idle.h" #include "io.h" #include "panic.h" #include "kmalloc.h" #include "mm.h" #include "mouse.h" #include "netdev.h" #include "dhcp.h" #include "netlog.h" #include "paging.h" #include "process.h" #include "ramfs.h" #include "sys_gfx.h" #include "timer.h" #include "tss.h" #include "usbhid.h" #include "wm.h" #include "serial.h" #include "version.h" #include "vga.h" #include "vfs.h" static inline void outb(unsigned short port, unsigned char v) { __asm__ volatile ("outb %0, %1" : : "a"(v), "Nd"(port)); } volatile unsigned int ticks; struct idt_entry { unsigned short offset_lo; unsigned short selector; unsigned char zero; unsigned char type; unsigned short offset_hi; } __attribute__((packed)); struct idtr_desc { unsigned short limit; unsigned int base; } __attribute__((packed)); static struct idt_entry idt[256]; static struct idtr_desc idtr; extern void pit_irq_stub(void); extern void kbd_irq_stub(void); extern void fdc_irq_stub(void); extern void default_irq_stub(void); extern void syscall_stub(void); extern unsigned int exc_stub_table[]; unsigned int get_ticks_ms(void) { return ticks; } void exc_handler(struct exc_state *st); void exc_handler(struct exc_state *st) { unsigned int vector = st->vector; unsigned int cr2 = 0; static const char * const names[] = { "#DE Divide Error", "#DB Debug", "NMI", "#BP Breakpoint", "#OF Overflow", "#BR Bound Range", "#UD Invalid Opcode", "#NM No FPU", "#DF Double Fault", "Coprocessor Overrun", "#TS Invalid TSS", "#NP Seg Not Present", "#SS Stack Fault", "#GP General Protection", "#PF Page Fault", "Reserved", "#MF FPU Error", "#AC Alignment Check", "#MC Machine Check", "#XM SIMD Error", }; __asm__ volatile ("mov %%cr2, %0" : "=r"(cr2)); /* A fault from ring 3 is a bug in a user command (or its ELF): kill that * process and keep the kernel running. Kernel faults still halt. */ if ((st->cs & 3) == 3) { serial_puts(SERIAL_COM1, "\n*** user fault vec "); serial_puthex(SERIAL_COM1, vector); serial_puts(SERIAL_COM1, " eip="); serial_puthex(SERIAL_COM1, st->eip); serial_puts(SERIAL_COM1, " cr2="); serial_puthex(SERIAL_COM1, cr2); serial_puts(SERIAL_COM1, " -- process killed\n"); io_putstr("\n*** fault: "); io_putstr(vector < 20 ? names[vector] : "unknown vector"); io_putstr(" -- command killed\n"); process_exit(); /* marks us dead and waits to be switched out */ } /* Fatal kernel fault: the banner goes straight into the LFB (no serial * console needed) and the full state is mirrored to COM1. */ panic_report(st, vector < 20 ? names[vector] : "unknown vector"); for (;;) __asm__ volatile ("cli; hlt"); } static void set_idt_gate(int vec, unsigned int handler) { idt[vec].offset_lo = (unsigned short)(handler & 0xFFFF); idt[vec].selector = 0x08; idt[vec].zero = 0; idt[vec].type = 0x8E; idt[vec].offset_hi = (unsigned short)((handler >> 16) & 0xFFFF); } /* Trap gate (DPL=3) so ring-3 can `int` into it; a trap gate does NOT clear * IF, so a blocking syscall (e.g. sleep) can still be preempted by the timer. */ static void set_idt_gate_user(int vec, unsigned int handler) { idt[vec].offset_lo = (unsigned short)(handler & 0xFFFF); idt[vec].selector = 0x08; idt[vec].zero = 0; idt[vec].type = 0xEF; idt[vec].offset_hi = (unsigned short)((handler >> 16) & 0xFFFF); } static void timer_init(void) { int i; /* Remap PICs: master at 0x20, slave at 0x28. */ outb(0x20, 0x11); outb(0xA0, 0x11); outb(0x21, 0x20); outb(0xA1, 0x28); outb(0x21, 0x04); outb(0xA1, 0x02); outb(0x21, 0x01); outb(0xA1, 0x01); outb(0x21, 0xFC); outb(0xA1, 0xFF); /* Default handler for all 256 vectors: absorbs any unexpected interrupt (including spurious IRQ 7) with an EOI + iret. */ for (i = 0; i < 256; i++) set_idt_gate(i, (unsigned int)default_irq_stub); /* Exception handlers 0-31: ring-3 faults kill the process, kernel faults print the panic banner and halt (see exc_handler). */ for (i = 0; i < 32; i++) set_idt_gate(i, exc_stub_table[i]); /* Hardware IRQ handlers. */ set_idt_gate(0x20, (unsigned int)pit_irq_stub); set_idt_gate(0x21, (unsigned int)kbd_irq_stub); set_idt_gate(0x26, (unsigned int)fdc_irq_stub); /* Syscall gate (ring-3 can int 0x80). */ set_idt_gate_user(0x80, (unsigned int)syscall_stub); idtr.limit = (unsigned short)(sizeof(idt) - 1); idtr.base = (unsigned int)idt; __asm__ volatile ("lidt %0" : : "m"(idtr)); outb(0x43, 0x36); outb(0x40, (unsigned char)(1193 & 0xFF)); outb(0x40, (unsigned char)((1193 >> 8) & 0xFF)); __asm__ volatile ("sti"); } extern unsigned char __bss_start[], __bss_end[]; /* The idle process: keeps the parts of the system that must not depend on * the window manager running. Input routing, cursor blink, kexec recovery, * netlog flushing and gfx-session cleanup live here; the WM process only * handles window state and drawing. */ static void kernel_idle_loop(void) { for (;;) { mouse_poll_update(); wm_pump_keyboard(); wm_blink_cursor(); netlog_flush(); wm_handle_kexec(); wm_server_supervise(); if (wm_server_can_reap()) sys_gfx_collect(); if (!wm_server_frame_active()) vga_fb_flush_budget(VGA_FLUSH_BUDGET_BYTES); cpu_idle(); } } void kernel_main(void); void kernel_main(void) { unsigned char *p = __bss_start; while (p < __bss_end) *p++ = 0; serial_init(SERIAL_COM1); serial_ring_init(); /* Network console mirror from the very first line on; the ring holds the * early boot output until the WM loop starts flushing it. */ netlog_init(); serial_puts(SERIAL_COM1, "\n" OS_NAME " v" OS_VERSION " booted\n"); mm_init(); mm_dump(); kmalloc_init(); paging_init(); io_init(); idle_init(); /* process_init + gdt_tss_init must run BEFORE timer_init: once the PIT is * started (sti in timer_init) the context-switch stub runs on every tick * and reads procs[].cr3 / procs[].kstack_top / the TSS, so those have to be * valid first (otherwise the first switch loads a garbage CR3 and faults). */ process_init(); gdt_tss_init(); timer_init(); mouse_init(); /* USB HID backend (mouse + keyboard): controller bring-up + first * scan; devices plugged in later are picked up by the hotplug * watcher in the WM loop. */ usbhid_init(); vga_shadow_init(); vga_fb_flush(); vfs_mount_all(); /* The command pack: read-only, mounted at /ramfs (see ramfs.c). */ { extern unsigned char _binary_cmds_pack_start[]; extern unsigned char _binary_cmds_pack_end[]; unsigned int pack_len = (unsigned int)(_binary_cmds_pack_end - _binary_cmds_pack_start); if (ramfs_init(_binary_cmds_pack_start, pack_len) != 0) serial_puts(SERIAL_COM1, "ramfs: bad pack\n"); else { serial_puts(SERIAL_COM1, "ramfs: pack ok, "); serial_putdec(SERIAL_COM1, ramfs_count()); serial_puts(SERIAL_COM1, " files\n"); vfs_mount_ramfs(); } } /* Bring the NIC up before the WM loop starts, so an idle board can pick * up a network kexec (`make net-dev`) without any typing. */ netdev_active(); /* With a NIC present, try DHCP; on failure the static default stays. */ if (netdev_active()) dhcp_run(3000); /* Slot 0 is the idle loop; the window server is initialized before the * ring-3 WM is spawned from /ramfs/bin/wm. */ wm_server_init(); wm_server_start(); kernel_idle_loop(); }