/* I/O APIC masking. * * This kernel has no IOAPIC driver: the BSP keeps the 8259 PIC and delivers * its interrupts through LAPIC LINT0 in ExtINT mode (lapic.c). Firmware may * still leave IOAPIC redirection entries programmed, and their vectors can * collide with the PIC vectors (0x20..0x2f) or the LAPIC timer vector 0x30. * Masking every normal entry makes the 8259 path deterministic. * * ExtINT-delivery entries are deliberately left unmasked: a few boards route * the 8259 output through an IOAPIC pin instead of LINT0, and that entry must * keep working. Entries that are already masked are skipped. */ #include "ioapic.h" #include "acpi.h" #include "paging.h" #include "serial.h" #define IOAPIC_REGSEL 0x00 #define IOAPIC_IOWIN 0x10 #define IOAPIC_VER 0x01 #define IOAPIC_REDTBL 0x10 #define IOAPIC_MASK 0x00010000u #define IOAPIC_DELMODE_MASK 0x00000700u #define IOAPIC_DELMODE_EXTINT 0x00000700u static unsigned int ioapic_read(volatile unsigned int *base, unsigned int reg) { base[IOAPIC_REGSEL / 4] = reg; return base[IOAPIC_IOWIN / 4]; } static void ioapic_write(volatile unsigned int *base, unsigned int reg, unsigned int val) { base[IOAPIC_REGSEL / 4] = reg; base[IOAPIC_IOWIN / 4] = val; } void ioapic_mask_all(void) { unsigned int n = acpi_ioapic_count(); unsigned int i; for (i = 0; i < n; i++) { unsigned int addr = acpi_ioapic_base(i); volatile unsigned int *base; unsigned int ver, entries, j, masked = 0; if (!addr) continue; paging_map_mmio(addr, 0x1000); base = (volatile unsigned int *)addr; ver = ioapic_read(base, IOAPIC_VER); if (ver == 0xFFFFFFFFu) continue; entries = ((ver >> 16) & 0xFFu) + 1u; for (j = 0; j < entries; j++) { unsigned int lo = ioapic_read(base, IOAPIC_REDTBL + 2u * j); if (lo & IOAPIC_MASK) continue; if ((lo & IOAPIC_DELMODE_MASK) == IOAPIC_DELMODE_EXTINT) continue; ioapic_write(base, IOAPIC_REDTBL + 2u * j, lo | IOAPIC_MASK); masked++; } serial_puts(SERIAL_COM1, "ioapic: masked "); serial_putdec(SERIAL_COM1, masked); serial_puts(SERIAL_COM1, " of "); serial_putdec(SERIAL_COM1, entries); serial_puts(SERIAL_COM1, " entries at "); serial_puthex(SERIAL_COM1, addr); serial_puts(SERIAL_COM1, "\n"); } }