/* Kernel: entered from bootloader in 32-bit protected mode at 0x7E00. * Must be linked so this function is at 0x7E00 (see kernel.ld). * Simple terminal: keyboard echo. */ #define VGA_BASE ((volatile unsigned short *)0xB8000) #define VGA_ATTR 0x0A /* green on black */ #define VGA_COLS 80 #define VGA_ROWS 25 #define VGA_SIZE (VGA_COLS * VGA_ROWS) #define DEBUG_ROW 24 /* last row: debug line (input vs echo) */ #define CONTENT_ROWS (DEBUG_ROW) /* rows 0..23 for terminal */ #define CONTENT_SIZE (CONTENT_ROWS * VGA_COLS) /* Port I/O */ static inline unsigned char inb(unsigned short port) { unsigned char v; __asm__ volatile ("inb %1, %0" : "=a"(v) : "Nd"(port)); return v; } static inline void outb(unsigned short port, unsigned char v) { __asm__ volatile ("outb %0, %1" : : "a"(v), "Nd"(port)); } /* Disable the VGA hardware cursor (BIOS blinking underline at top-left). */ static void disable_hw_cursor(void) { outb(0x3D4, 0x0A); /* Cursor Start register */ outb(0x3D5, 0x20); /* Bit 5 = cursor disable */ } /* PS/2 keyboard: data port 0x60, status 0x64 (bit 0 = output buffer full) */ #define KB_DATA 0x60 #define KB_STATUS 0x64 /* Timer: PIT at 1 kHz (1 tick = 1 ms). IRQ0 -> INT 0x20 after PIC remap. */ #define PIT_HZ 1000 #define CURSOR_MS 500 #define BUSY_MS 33 volatile unsigned int ticks; /* milliseconds since timer_init */ /* IDT entry (8 bytes) and table for vector 0x20 (IRQ0). */ struct idt_entry { unsigned short offset_lo; unsigned short selector; unsigned char zero; unsigned char type; unsigned short offset_hi; } __attribute__((packed)); struct idtr_desc { unsigned short limit; unsigned int base; } __attribute__((packed)); static struct idt_entry idt[256]; static struct idtr_desc idtr; extern void pit_irq_stub(void); void pit_irq(void); /* called from timer.S stub */ void pit_irq(void) { ticks++; outb(0x20, 0x20); /* EOI to master PIC */ } static void timer_init(void) { unsigned int stub = (unsigned int)pit_irq_stub; /* Remap PIC: IRQ0..7 -> INT 0x20..0x27 */ outb(0x20, 0x11); outb(0xA0, 0x11); outb(0x21, 0x20); outb(0xA1, 0x28); outb(0x21, 0x04); outb(0xA1, 0x02); outb(0x21, 0x01); outb(0xA1, 0x01); outb(0x21, 0xFE); /* mask all except IRQ0 on master */ outb(0xA1, 0xFF); /* mask all on slave */ /* IDT entry for 0x20 (IRQ0) */ idt[0x20].offset_lo = (unsigned short)(stub & 0xFFFF); idt[0x20].selector = 0x08; idt[0x20].zero = 0; idt[0x20].type = 0x8E; /* 32-bit interrupt gate */ idt[0x20].offset_hi = (unsigned short)((stub >> 16) & 0xFFFF); idtr.limit = (unsigned short)(sizeof(idt) - 1); idtr.base = (unsigned int)idt; __asm__ volatile ("lidt %0" : : "m"(idtr)); /* PIT channel 0: 1 kHz (divisor 1193) */ outb(0x43, 0x36); outb(0x40, (unsigned char)(1193 & 0xFF)); outb(0x40, (unsigned char)((1193 >> 8) & 0xFF)); __asm__ volatile ("sti"); } /* Scancode set 1 (XT) -> ASCII. 0 = ignore. Set 1 break = make | 0x80, we ignore those. */ static const unsigned char scancode_to_ascii[256] __attribute__((section(".rodata"))) = { [0x02] = '1', [0x03] = '2', [0x04] = '3', [0x05] = '4', [0x06] = '5', [0x07] = '6', [0x08] = '7', [0x09] = '8', [0x0A] = '9', [0x0B] = '0', [0x0C] = '-', [0x0D] = '=', [0x0E] = '\b', [0x0F] = '\t', [0x10] = 'q', [0x11] = 'w', [0x12] = 'e', [0x13] = 'r', [0x14] = 't', [0x15] = 'y', [0x16] = 'u', [0x17] = 'i', [0x18] = 'o', [0x19] = 'p', [0x1A] = '[', [0x1B] = ']', [0x1C] = '\n', [0x1E] = 'a', [0x1F] = 's', [0x20] = 'd', [0x21] = 'f', [0x22] = 'g', [0x23] = 'h', [0x24] = 'j', [0x25] = 'k', [0x26] = 'l', [0x27] = ';', [0x28] = '\'', [0x29] = '`', [0x2B] = '\\', [0x2C] = 'z', [0x2D] = 'x', [0x2E] = 'c', [0x2F] = 'v', [0x30] = 'b', [0x31] = 'n', [0x32] = 'm', [0x33] = ',', [0x34] = '.', [0x35] = '/', [0x39] = ' ', }; /* Set 1: left shift make 0x2A break 0xAA, right shift make 0x36 break 0xB6 */ static int shift_pressed; static unsigned int cursor; /* linear position 0 .. CONTENT_SIZE-1 */ static unsigned char last_scancode; /* set by getchar for debug line */ #define BUSY_POS (DEBUG_ROW * VGA_COLS + 79) /* bottom-right: never overwritten by echo */ static unsigned int busy_idx; /* 0..3 for busy_chars */ static unsigned int last_busy_tick; /* Explicit ASCII so no encoding/escape issues: - \ | / */ static const unsigned char busy_chars[4] = { 0x2D, 0x5C, 0x7C, 0x2F }; /* Blinking cursor: cell content when cursor is hidden; 0xDB = full block (CP437) */ static unsigned short cursor_cell; static int cursor_visible; static unsigned int last_cursor_tick; #define CURSOR_BLOCK ((unsigned short)((VGA_ATTR << 8) | 0xDB)) /* Restore cell at current cursor, then update cursor position and cursor_cell. */ static void hide_cursor_at(unsigned int pos) { VGA_BASE[pos] = cursor_cell; } static void putchar(char c) { if (c == '\n') { hide_cursor_at(cursor); cursor = (cursor / VGA_COLS + 1) * VGA_COLS; if (cursor >= CONTENT_SIZE) { unsigned int i; for (i = 0; i < (CONTENT_ROWS - 1) * VGA_COLS; i++) VGA_BASE[i] = VGA_BASE[i + VGA_COLS]; for (i = (CONTENT_ROWS - 1) * VGA_COLS; i < CONTENT_SIZE; i++) VGA_BASE[i] = (unsigned short)(VGA_ATTR << 8); cursor = (CONTENT_ROWS - 1) * VGA_COLS; } cursor_cell = (unsigned short)(VGA_ATTR << 8); return; } if (c == '\b') { if (cursor > 0) { hide_cursor_at(cursor); cursor--; cursor_cell = VGA_BASE[cursor]; } return; } if (cursor < CONTENT_SIZE) { VGA_BASE[cursor] = (unsigned short)((VGA_ATTR << 8) | (unsigned char)c); cursor++; cursor_cell = (unsigned short)(VGA_ATTR << 8); } } /* Draw blinking cursor at current cursor position (every CURSOR_MS ms). */ static void update_cursor_blink(void) { unsigned int t = ticks; if (t - last_cursor_tick >= CURSOR_MS) { last_cursor_tick = t; cursor_visible = !cursor_visible; } if (cursor_visible) VGA_BASE[cursor] = CURSOR_BLOCK; else VGA_BASE[cursor] = cursor_cell; } /* Write one hex byte at VGA position; returns next position. */ static unsigned int puthex(unsigned int pos, unsigned char byte) { static const char hex[] = "0123456789ABCDEF"; VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | hex[byte >> 4]); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | hex[byte & 0x0F]); return pos; } /* Update bottom line with last scancode and decoded char. Leaves col 79 for busy. */ static void debug_line(unsigned char sc, char c) { unsigned int i, pos = DEBUG_ROW * VGA_COLS; for (i = 0; i < 79; i++) VGA_BASE[pos + i] = (unsigned short)(VGA_ATTR << 8); /* "SC:XX CH:YY 'c'" */ VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | 'S'); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | 'C'); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | ':'); pos = puthex(pos, sc); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | ' '); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | 'C'); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | 'H'); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | ':'); pos = puthex(pos, (unsigned char)c); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | ' '); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | '\''); VGA_BASE[pos++] = (unsigned short)((VGA_ATTR << 8) | (c >= 0x20 && c < 0x7F ? (unsigned char)c : '.')); VGA_BASE[pos] = (unsigned short)((VGA_ATTR << 8) | '\''); } static void putstr(const char *s) { while (*s) putchar(*s++); } /* Apply shift to get US layout shifted character. Returns c unchanged if no shift variant. */ static char apply_shift(char c) { if (!shift_pressed) return c; if (c >= 'a' && c <= 'z') return (char)(c - 32); switch ((unsigned char)c) { case '1': return '!'; case '2': return '@'; case '3': return '#'; case '4': return '$'; case '5': return '%'; case '6': return '^'; case '7': return '&'; case '8': return '*'; case '9': return '('; case '0': return ')'; case '-': return '_'; case '=': return '+'; case '[': return '{'; case ']': return '}'; case ';': return ':'; case '\'': return '"'; case '`': return '~'; case '\\': return '|'; case ',': return '<'; case '.': return '>'; case '/': return '?'; default: return c; } } /* Draw busy indicator at bottom-right (every BUSY_MS ms). */ static void update_busy(void) { unsigned int t = ticks; if (t - last_busy_tick >= BUSY_MS) { last_busy_tick = t; busy_idx = (busy_idx + 1) % 4; } VGA_BASE[BUSY_POS] = (unsigned short)((VGA_ATTR << 8) | busy_chars[busy_idx]); } /* String in .text so it loads with the kernel */ static const char msg[] __attribute__((section(".text"))) = "Nebs OS |o|"; static const char prompt[] __attribute__((section(".text"))) = "\n> "; /* Entry point: must be first in .text so bootloader jump to 0x7E00 hits it */ void kernel_main(void) __attribute__((section(".text.entry"))); void kernel_main(void) { unsigned i; disable_hw_cursor(); /* remove BIOS blinking underline at top-left */ /* Clear screen */ for (i = 0; i < VGA_SIZE; i++) VGA_BASE[i] = (unsigned short)(VGA_ATTR << 8); cursor = 0; cursor_cell = (unsigned short)(VGA_ATTR << 8); cursor_visible = 1; last_cursor_tick = 0; last_busy_tick = 0; busy_idx = 0; putstr(msg); putstr(prompt); timer_init(); /* PIT 1 kHz, IDT, sti; ticks counts ms */ last_cursor_tick = ticks; last_busy_tick = ticks; /* Drain keyboard buffer so we don't echo leftover/garbage bytes */ while (inb(KB_STATUS) & 1) (void)inb(KB_DATA); /* Terminal echo loop: busy indicator, blinking cursor at cursor, then poll keyboard */ for (;;) { update_busy(); update_cursor_blink(); if (inb(KB_STATUS) & 1) { unsigned char sc = inb(KB_DATA); if (sc & 0x80) { /* Set 1 break: release shift */ if (sc == 0xAA || sc == 0xB6) shift_pressed = 0; continue; } if (sc == 0x2A || sc == 0x36) { shift_pressed = 1; continue; } { char c = (char)scancode_to_ascii[sc]; if (c) { c = apply_shift(c); last_scancode = sc; debug_line(last_scancode, c); putchar(c); if (c == '\n') putstr(prompt); } } } else __asm__ volatile ("hlt"); /* wait for next interrupt (PIT or other) */ } }