/* Cirrus Logic GD5446 BitBLT acceleration. Reference: QEMU hw/display/cirrus_vga.c (register offsets, ROP codes). */ #include "cirrus.h" #include "pci.h" #include "vga.h" /* Sequencer (0x3C4/0x3C5). */ #define SR_UNLOCK 0x06 #define SR_UNLOCK_VAL 0x12 #define SR_CURSOR_X 0x10 #define SR_CURSOR_Y 0x11 #define SR_CURSOR_ATTR 0x12 #define SR_CURSOR_PAT 0x13 #define CURSOR_SHOW 0x01 #define CURSOR_HIDDENPEL 0x02 /* Graphics controller BitBLT registers (0x3CE/0x3CF). */ #define GR_WIDTH_LO 0x20 #define GR_WIDTH_HI 0x21 #define GR_HEIGHT_LO 0x22 #define GR_HEIGHT_HI 0x23 #define GR_DSTPITCH_LO 0x24 #define GR_DSTPITCH_HI 0x25 #define GR_SRCPITCH_LO 0x26 #define GR_SRCPITCH_HI 0x27 #define GR_DSTADDR_LO 0x28 #define GR_DSTADDR_MID 0x29 #define GR_DSTADDR_HI 0x2a #define GR_SRCADDR_LO 0x2c #define GR_SRCADDR_MID 0x2d #define GR_SRCADDR_HI 0x2e #define GR_MODE 0x30 #define GR_STATUS 0x31 #define GR_ROP 0x32 #define GR_MODEEXT 0x33 #define BLT_BUSY 0x01 #define BLT_START 0x02 #define BLTMODE_BACKWARDS 0x01 #define BLTMODE_PIXELWIDTH_MASK 0x30 #define BLTMODE_PIXELWIDTH16 0x10 #define BLTMODE_PIXELWIDTH24 0x20 #define BLTMODE_PIXELWIDTH32 0x30 #define BLTMODE_PATTERNCOPY 0x40 #define BLTMODE_COLOREXPAND 0x80 #define BLTMODEEXT_SOLIDFILL 0x04 #define ROP_SRC 0x0d static int cirrus_present; static void gr_write(unsigned char idx, unsigned char val) { port_outb(0x3CE, idx); port_outb(0x3CF, val); } static unsigned char gr_read(unsigned char idx) { port_outb(0x3CE, idx); return port_inb(0x3CF); } static void sr_write(unsigned char idx, unsigned char val) { port_outb(0x3C4, idx); port_outb(0x3C5, val); } static unsigned char sr_read(unsigned char idx) { port_outb(0x3C4, idx); return port_inb(0x3C5); } void cirrus_init(void) { cirrus_present = 0; sr_write(SR_UNLOCK, SR_UNLOCK_VAL); if (sr_read(SR_UNLOCK) == SR_UNLOCK_VAL) cirrus_present = 1; } int cirrus_available(void) { return cirrus_present; } void cirrus_blit(unsigned int sx, unsigned int sy, unsigned int dx, unsigned int dy, unsigned int w, unsigned int h) { unsigned int bpp = vga_fb_bpp(); unsigned int pb = (bpp == 16) ? 2 : (bpp == 24) ? 3 : 4; unsigned int pitch = vga_fb_pitch(); unsigned int src = sy * pitch + sx * pb; unsigned int dst = dy * pitch + dx * pb; unsigned int width_bytes = w * pb; unsigned int mode = 0; if (bpp == 16) mode |= BLTMODE_PIXELWIDTH16; else if (bpp == 24) mode |= BLTMODE_PIXELWIDTH24; else mode |= BLTMODE_PIXELWIDTH32; if (dst > src) { /* Overlapping, moving down/right: walk from the bottom-right so the source isn't clobbered. The engine runs backward with a positive pitch written; the address points at the last byte of the region. */ mode |= BLTMODE_BACKWARDS; src += (h - 1) * pitch + (width_bytes - 1); dst += (h - 1) * pitch + (width_bytes - 1); } gr_write(GR_WIDTH_LO, (unsigned char)((width_bytes - 1) & 0xFF)); gr_write(GR_WIDTH_HI, (unsigned char)(((width_bytes - 1) >> 8) & 0xFF)); gr_write(GR_HEIGHT_LO, (unsigned char)((h - 1) & 0xFF)); gr_write(GR_HEIGHT_HI, (unsigned char)(((h - 1) >> 8) & 0xFF)); gr_write(GR_DSTPITCH_LO, (unsigned char)(pitch & 0xFF)); gr_write(GR_DSTPITCH_HI, (unsigned char)((pitch >> 8) & 0xFF)); gr_write(GR_SRCPITCH_LO, (unsigned char)(pitch & 0xFF)); gr_write(GR_SRCPITCH_HI, (unsigned char)((pitch >> 8) & 0xFF)); gr_write(GR_DSTADDR_LO, (unsigned char)(dst & 0xFF)); gr_write(GR_DSTADDR_MID, (unsigned char)((dst >> 8) & 0xFF)); gr_write(GR_DSTADDR_HI, (unsigned char)((dst >> 16) & 0xFF)); gr_write(GR_SRCADDR_LO, (unsigned char)(src & 0xFF)); gr_write(GR_SRCADDR_MID, (unsigned char)((src >> 8) & 0xFF)); gr_write(GR_SRCADDR_HI, (unsigned char)((src >> 16) & 0xFF)); gr_write(GR_MODE, (unsigned char)mode); gr_write(GR_ROP, ROP_SRC); gr_write(GR_MODEEXT, 0); gr_write(GR_STATUS, 0); /* ensure START is clear so the write triggers */ gr_write(GR_STATUS, BLT_START); while (gr_read(GR_STATUS) & BLT_BUSY) ; } void cirrus_fill(unsigned int x, unsigned int y, unsigned int w, unsigned int h, unsigned int r, unsigned int g, unsigned int b) { unsigned int bpp = vga_fb_bpp(); unsigned int pb = (bpp == 16) ? 2 : (bpp == 24) ? 3 : 4; unsigned int pitch = vga_fb_pitch(); unsigned int dst = y * pitch + x * pb; unsigned int width_bytes = w * pb; unsigned int mode = BLTMODE_PATTERNCOPY | BLTMODE_COLOREXPAND; /* Set the foreground color (the solid fill source). */ if (bpp == 16) { unsigned short rgb565 = (unsigned short) (((r >> 3) << 11) | ((g >> 2) << 5) | (b >> 3)); mode |= BLTMODE_PIXELWIDTH16; gr_write(0x01, (unsigned char)(rgb565 & 0xFF)); gr_write(0x11, (unsigned char)((rgb565 >> 8) & 0xFF)); } else if (bpp == 24) { mode |= BLTMODE_PIXELWIDTH24; gr_write(0x01, (unsigned char)b); gr_write(0x11, (unsigned char)g); gr_write(0x13, (unsigned char)r); } else { mode |= BLTMODE_PIXELWIDTH32; gr_write(0x01, (unsigned char)b); gr_write(0x11, (unsigned char)g); gr_write(0x13, (unsigned char)r); gr_write(0x15, 0); } gr_write(GR_WIDTH_LO, (unsigned char)((width_bytes - 1) & 0xFF)); gr_write(GR_WIDTH_HI, (unsigned char)(((width_bytes - 1) >> 8) & 0xFF)); gr_write(GR_HEIGHT_LO, (unsigned char)((h - 1) & 0xFF)); gr_write(GR_HEIGHT_HI, (unsigned char)(((h - 1) >> 8) & 0xFF)); gr_write(GR_DSTPITCH_LO, (unsigned char)(pitch & 0xFF)); gr_write(GR_DSTPITCH_HI, (unsigned char)((pitch >> 8) & 0xFF)); gr_write(GR_DSTADDR_LO, (unsigned char)(dst & 0xFF)); gr_write(GR_DSTADDR_MID, (unsigned char)((dst >> 8) & 0xFF)); gr_write(GR_DSTADDR_HI, (unsigned char)((dst >> 16) & 0xFF)); gr_write(GR_MODE, (unsigned char)mode); gr_write(GR_ROP, ROP_SRC); gr_write(GR_MODEEXT, BLTMODEEXT_SOLIDFILL); gr_write(GR_STATUS, 0); /* ensure START is clear so the write triggers */ gr_write(GR_STATUS, BLT_START); while (gr_read(GR_STATUS) & BLT_BUSY) ; } /* Pointer-arrow shape (16x16), same as the software cursor: tip at top-left, widening triangle then a narrowing tail. Placed in the top-left of the 32x32 hardware-cursor box. MSB (bit 15) = column 0. */ static const unsigned short cirrus_cursor_arrow[16] = { 0x8000, 0xC000, 0xE000, 0xF000, 0xF800, 0xFC00, 0xFE00, 0xFF00, 0xFC00, 0xE000, 0x8000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, }; void cirrus_cursor_setup(void) { unsigned char bitmap[256]; unsigned int r, i; unsigned int vram = vga_fb_vram_kb() * 1024; unsigned char *dst; /* 32x32 two-plane cursor: AND plane (offset 0..127), XOR plane (128..255), 4 bytes per row. The arrow is drawn in the XOR plane (so pixels are color0 = white) with the AND plane all-zero (no invert). */ for (i = 0; i < 256; i++) bitmap[i] = 0; for (r = 0; r < 16; r++) { unsigned short bits = cirrus_cursor_arrow[r]; bitmap[128 + r * 4 + 0] = (unsigned char)((bits >> 8) & 0xFF); /* x=0..7 */ bitmap[128 + r * 4 + 1] = (unsigned char)(bits & 0xFF); /* x=8..15 */ } /* Upload to the top of VRAM (SR[0x13] = 0 selects the first 256-byte block). */ sr_write(SR_CURSOR_PAT, 0); dst = (unsigned char *)(vga_fb_lfb_addr() + vram - 16384); for (i = 0; i < 256; i++) dst[i] = bitmap[i]; /* Cursor colors via the hidden DAC palette: entry 0 = white, 15 = black. */ sr_write(SR_CURSOR_ATTR, CURSOR_HIDDENPEL); port_outb(0x3C8, 0); port_outb(0x3C9, 63); port_outb(0x3C9, 63); port_outb(0x3C9, 63); port_outb(0x3C8, 15); port_outb(0x3C9, 0); port_outb(0x3C9, 0); port_outb(0x3C9, 0); sr_write(SR_CURSOR_ATTR, CURSOR_SHOW); } void cirrus_cursor_move(unsigned int x, unsigned int y) { /* Position is 11 bits; low 3 bits select the index alias, high 8 are data. */ sr_write(SR_CURSOR_X | ((x & 0x7) << 5), (unsigned char)(x >> 3)); sr_write(SR_CURSOR_Y | ((y & 0x7) << 5), (unsigned char)(y >> 3)); } void cirrus_cursor_show(int show) { unsigned char v = sr_read(SR_CURSOR_ATTR); if (show) v |= CURSOR_SHOW; else v &= ~CURSOR_SHOW; sr_write(SR_CURSOR_ATTR, v); }