|
|
@@ -0,0 +1,476 @@
|
|
|
+/* AHCI (SATA) driver: PCI discovery, port bring-up, IDENTIFY and DMA
|
|
|
+ * read/write (READ/WRITE DMA EXT, LBA48), all polled (no IRQs).
|
|
|
+ *
|
|
|
+ * Target: the ION/AT3IONT-I MCP79 SATA controller in AHCI mode (the same
|
|
|
+ * hardware family Linux drives with board_ahci_noncq), and QEMU's ich9-ahci
|
|
|
+ * for testing. Only non-NCQ commands are used.
|
|
|
+ *
|
|
|
+ * All buffers (command list, FIS receive area, command table, DMA bounce
|
|
|
+ * buffer) come from the page allocator -- the kernel lives under a tight
|
|
|
+ * linker bound, so nothing large may go into BSS. */
|
|
|
+
|
|
|
+#include "ahci.h"
|
|
|
+#include "ata.h"
|
|
|
+#include "mm.h"
|
|
|
+#include "paging.h"
|
|
|
+#include "pci.h"
|
|
|
+#include "process.h"
|
|
|
+#include "serial.h"
|
|
|
+#include "timer.h"
|
|
|
+
|
|
|
+#define AHCI_DEBUG 0
|
|
|
+
|
|
|
+/* ---- generic host control registers (ABAR-relative) ---- */
|
|
|
+#define H_CAP 0x00
|
|
|
+#define H_GHC 0x04
|
|
|
+#define H_PI 0x0C
|
|
|
+
|
|
|
+#define GHC_AE 0x80000000u /* AHCI enable */
|
|
|
+
|
|
|
+/* ---- port registers (0x100 + 0x80 * port) ---- */
|
|
|
+#define P_CLB 0x00
|
|
|
+#define P_CLBU 0x04
|
|
|
+#define P_FB 0x08
|
|
|
+#define P_FBU 0x0C
|
|
|
+#define P_IS 0x10
|
|
|
+#define P_IE 0x14
|
|
|
+#define P_CMD 0x18
|
|
|
+#define P_TFD 0x20
|
|
|
+#define P_SIG 0x24
|
|
|
+#define P_SSTS 0x28
|
|
|
+#define P_SCTL 0x2C
|
|
|
+#define P_SERR 0x30
|
|
|
+#define P_CI 0x38
|
|
|
+
|
|
|
+#define CMD_ST 0x00000001u /* start */
|
|
|
+#define CMD_FRE 0x00000010u /* FIS receive enable */
|
|
|
+#define CMD_FR 0x00004000u /* FIS receive running */
|
|
|
+#define CMD_CR 0x00008000u /* command list running */
|
|
|
+
|
|
|
+#define TFD_ERR 0x01
|
|
|
+#define TFD_BSY 0x80
|
|
|
+#define TFD_DRQ 0x08
|
|
|
+#define TFD_ERR_BITS (TFD_ERR | TFD_BSY | TFD_DRQ)
|
|
|
+
|
|
|
+#define IS_TFES 0x40000000u /* task file error status */
|
|
|
+
|
|
|
+#define SIG_ATA 0x00000101u
|
|
|
+
|
|
|
+/* Register Host-to-Device FIS. */
|
|
|
+#define FIS_H2D 0x27
|
|
|
+#define FIS_C 0x80
|
|
|
+
|
|
|
+#define ATA_IDENTIFY 0xEC
|
|
|
+#define ATA_READ_DMA_EXT 0x25
|
|
|
+#define ATA_WRITE_DMA_EXT 0x35
|
|
|
+
|
|
|
+#define AHCI_CHUNK 255 /* sectors per command (128 KB-ish) */
|
|
|
+#define BOUNCE_PAGES 33 /* 255 * 512 = 130560 B < 33 * 4096 */
|
|
|
+
|
|
|
+static struct {
|
|
|
+ int inited;
|
|
|
+ int ok;
|
|
|
+ unsigned int abar;
|
|
|
+ unsigned int nports;
|
|
|
+ unsigned int pi;
|
|
|
+ unsigned int cl; /* command list (1 page) */
|
|
|
+ unsigned int fis; /* FIS receive area (1 page) */
|
|
|
+ unsigned int ct; /* command table (1 page) */
|
|
|
+ unsigned int bounce; /* data bounce buffer (BOUNCE_PAGES) */
|
|
|
+} ahci;
|
|
|
+
|
|
|
+static unsigned int rd(unsigned int off)
|
|
|
+{
|
|
|
+ return *(volatile unsigned int *)(ahci.abar + off);
|
|
|
+}
|
|
|
+
|
|
|
+static void wr(unsigned int off, unsigned int v)
|
|
|
+{
|
|
|
+ *(volatile unsigned int *)(ahci.abar + off) = v;
|
|
|
+}
|
|
|
+
|
|
|
+static unsigned int prd(unsigned int port, unsigned int off)
|
|
|
+{
|
|
|
+ return *(volatile unsigned int *)(ahci.abar + 0x100 + 0x80 * port + off);
|
|
|
+}
|
|
|
+
|
|
|
+static void pwr(unsigned int port, unsigned int off, unsigned int v)
|
|
|
+{
|
|
|
+ *(volatile unsigned int *)(ahci.abar + 0x100 + 0x80 * port + off) = v;
|
|
|
+}
|
|
|
+
|
|
|
+static void mem_copy(unsigned char *dst, const unsigned char *src, unsigned int n)
|
|
|
+{
|
|
|
+ while (n--)
|
|
|
+ *dst++ = *src++;
|
|
|
+}
|
|
|
+
|
|
|
+static void delay_ms(unsigned int ms)
|
|
|
+{
|
|
|
+ unsigned int t0 = get_ticks_ms();
|
|
|
+ while (get_ticks_ms() - t0 < ms)
|
|
|
+ ;
|
|
|
+}
|
|
|
+
|
|
|
+/* ---- PCI discovery ---- */
|
|
|
+
|
|
|
+static int ahci_find(unsigned int *out_bus, unsigned int *out_dev, unsigned int *out_func)
|
|
|
+{
|
|
|
+ unsigned int bus, dev, func;
|
|
|
+
|
|
|
+ for (bus = 0; bus < 256; bus++) {
|
|
|
+ for (dev = 0; dev < 32; dev++) {
|
|
|
+ unsigned int id = pci_cfg_read32(bus, dev, 0, 0x00);
|
|
|
+ unsigned int htype, nfunc;
|
|
|
+
|
|
|
+ if (id == 0xFFFFFFFFu || id == 0)
|
|
|
+ continue;
|
|
|
+ htype = (pci_cfg_read32(bus, dev, 0, 0x0C) >> 16) & 0xFFu;
|
|
|
+ nfunc = (htype & 0x80u) ? 8u : 1u;
|
|
|
+ for (func = 0; func < nfunc; func++) {
|
|
|
+ unsigned int idf = pci_cfg_read32(bus, dev, func, 0x00);
|
|
|
+ unsigned int crev, cls, sub, prog;
|
|
|
+
|
|
|
+ if (idf == 0xFFFFFFFFu || idf == 0)
|
|
|
+ continue;
|
|
|
+ crev = pci_cfg_read32(bus, dev, func, 0x08);
|
|
|
+ cls = (crev >> 24) & 0xFFu;
|
|
|
+ sub = (crev >> 16) & 0xFFu;
|
|
|
+ prog = (crev >> 8) & 0xFFu;
|
|
|
+ if (cls != 0x01)
|
|
|
+ continue;
|
|
|
+ /* One line per storage function so a board whose
|
|
|
+ * SATA mode does not match can be diagnosed from
|
|
|
+ * the serial/netlog output (class CCDD, prog-if,
|
|
|
+ * vendor:device). */
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: storage fn ");
|
|
|
+ serial_putdec(SERIAL_COM1, bus);
|
|
|
+ serial_putc(SERIAL_COM1, ':');
|
|
|
+ serial_putdec(SERIAL_COM1, dev);
|
|
|
+ serial_putc(SERIAL_COM1, '.');
|
|
|
+ serial_putdec(SERIAL_COM1, func);
|
|
|
+ serial_puts(SERIAL_COM1, " id ");
|
|
|
+ serial_puthex(SERIAL_COM1, idf);
|
|
|
+ serial_puts(SERIAL_COM1, " class ");
|
|
|
+ serial_puthex(SERIAL_COM1, (cls << 8) | sub);
|
|
|
+ serial_puts(SERIAL_COM1, " prog ");
|
|
|
+ serial_puthex(SERIAL_COM1, prog);
|
|
|
+ serial_putc(SERIAL_COM1, '\n');
|
|
|
+ if (sub == 0x06 && prog == 0x01) {
|
|
|
+ *out_bus = bus;
|
|
|
+ *out_dev = dev;
|
|
|
+ *out_func = func;
|
|
|
+ return 0;
|
|
|
+ }
|
|
|
+ }
|
|
|
+ }
|
|
|
+ }
|
|
|
+ return -1;
|
|
|
+}
|
|
|
+
|
|
|
+/* ---- port bring-up ---- */
|
|
|
+
|
|
|
+static void ahci_port_init(unsigned int port)
|
|
|
+{
|
|
|
+ unsigned int t0, c;
|
|
|
+
|
|
|
+ /* Stop the port and its FIS receive engine. */
|
|
|
+ c = prd(port, P_CMD);
|
|
|
+ if (c & CMD_ST) {
|
|
|
+ pwr(port, P_CMD, c & ~CMD_ST);
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while ((prd(port, P_CMD) & CMD_CR) && get_ticks_ms() - t0 < 500)
|
|
|
+ ;
|
|
|
+ }
|
|
|
+ c = prd(port, P_CMD);
|
|
|
+ if (c & CMD_FRE) {
|
|
|
+ pwr(port, P_CMD, c & ~CMD_FRE);
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while ((prd(port, P_CMD) & CMD_FR) && get_ticks_ms() - t0 < 500)
|
|
|
+ ;
|
|
|
+ }
|
|
|
+
|
|
|
+ pwr(port, P_CLB, ahci.cl);
|
|
|
+ pwr(port, P_CLBU, 0);
|
|
|
+ pwr(port, P_FB, ahci.fis);
|
|
|
+ pwr(port, P_FBU, 0);
|
|
|
+
|
|
|
+ pwr(port, P_SERR, 0xFFFFFFFFu);
|
|
|
+ pwr(port, P_IS, 0xFFFFFFFFu);
|
|
|
+ pwr(port, P_IE, 0);
|
|
|
+
|
|
|
+ pwr(port, P_CMD, prd(port, P_CMD) | CMD_FRE);
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while (!(prd(port, P_CMD) & CMD_FR) && get_ticks_ms() - t0 < 500)
|
|
|
+ ;
|
|
|
+
|
|
|
+ /* Cold plug: reset the link if it is not established yet. */
|
|
|
+ if ((prd(port, P_SSTS) & 0x0Fu) != 3) {
|
|
|
+ pwr(port, P_SCTL, 1); /* DET = 1: initiate COMRESET */
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while ((prd(port, P_SSTS) & 0x0Fu) != 3 && get_ticks_ms() - t0 < 1000)
|
|
|
+ ;
|
|
|
+ }
|
|
|
+
|
|
|
+ pwr(port, P_CMD, prd(port, P_CMD) | CMD_ST);
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while (!(prd(port, P_CMD) & CMD_CR) && get_ticks_ms() - t0 < 500)
|
|
|
+ ;
|
|
|
+}
|
|
|
+
|
|
|
+int ahci_init(void)
|
|
|
+{
|
|
|
+ unsigned int bus, dev, func, bar, cmd, cap, i;
|
|
|
+
|
|
|
+ if (ahci.inited)
|
|
|
+ return ahci.ok ? 0 : -1;
|
|
|
+ ahci.inited = 1;
|
|
|
+
|
|
|
+ if (ahci_find(&bus, &dev, &func) != 0) {
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: no matching controller (need 0106:01)\n");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+
|
|
|
+ bar = pci_cfg_read32(bus, dev, func, 0x24);
|
|
|
+ if (bar & 1u) {
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: BAR5 is not MMIO\n");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+ bar &= 0xFFFFFFF0u;
|
|
|
+ if (!bar || bar == 0xFFFFFFF0u) {
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: BAR5 is unassigned\n");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+
|
|
|
+ cmd = pci_cfg_read32(bus, dev, func, 0x04);
|
|
|
+ pci_cfg_write32(bus, dev, func, 0x04, cmd | 0x0006u); /* mem + bus master */
|
|
|
+
|
|
|
+ process_map_mmio_all(bar, 0x2000);
|
|
|
+ ahci.abar = bar;
|
|
|
+
|
|
|
+ cap = rd(H_CAP);
|
|
|
+ if (cap == 0 || cap == 0xFFFFFFFFu) {
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: no register response\n");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+
|
|
|
+ ahci.cl = mm_alloc_page();
|
|
|
+ ahci.fis = mm_alloc_page();
|
|
|
+ ahci.ct = mm_alloc_page();
|
|
|
+ ahci.bounce = mm_alloc_pages(BOUNCE_PAGES);
|
|
|
+ if (!ahci.cl || !ahci.fis || !ahci.ct || !ahci.bounce) {
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: no memory for DMA buffers\n");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+ {
|
|
|
+ unsigned int *p;
|
|
|
+ unsigned int n;
|
|
|
+ for (p = (unsigned int *)ahci.cl, n = 0; n < 0x400; n++) p[n] = 0;
|
|
|
+ for (p = (unsigned int *)ahci.fis, n = 0; n < 0x400; n++) p[n] = 0;
|
|
|
+ for (p = (unsigned int *)ahci.ct, n = 0; n < 0x400; n++) p[n] = 0;
|
|
|
+ for (p = (unsigned int *)ahci.bounce, n = 0; n < BOUNCE_PAGES * 0x400; n++)
|
|
|
+ p[n] = 0;
|
|
|
+ }
|
|
|
+
|
|
|
+ wr(H_GHC, rd(H_GHC) | GHC_AE);
|
|
|
+
|
|
|
+ ahci.nports = (cap & 0x1Fu) + 1;
|
|
|
+ if (ahci.nports > 32)
|
|
|
+ ahci.nports = 32;
|
|
|
+ ahci.pi = rd(H_PI);
|
|
|
+
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: ctrl ");
|
|
|
+ serial_putdec(SERIAL_COM1, bus);
|
|
|
+ serial_putc(SERIAL_COM1, ':');
|
|
|
+ serial_putdec(SERIAL_COM1, dev);
|
|
|
+ serial_putc(SERIAL_COM1, '.');
|
|
|
+ serial_putdec(SERIAL_COM1, func);
|
|
|
+ serial_puts(SERIAL_COM1, " bar=");
|
|
|
+ serial_puthex(SERIAL_COM1, bar);
|
|
|
+ serial_puts(SERIAL_COM1, " pi=");
|
|
|
+ serial_puthex(SERIAL_COM1, ahci.pi);
|
|
|
+ serial_putc(SERIAL_COM1, '\n');
|
|
|
+
|
|
|
+ for (i = 0; i < ahci.nports; i++) {
|
|
|
+ if (ahci.pi & (1u << i))
|
|
|
+ ahci_port_init(i);
|
|
|
+ }
|
|
|
+
|
|
|
+ ahci.ok = 1;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+int ahci_controller_present(void)
|
|
|
+{
|
|
|
+ ahci_init();
|
|
|
+ return ahci.ok;
|
|
|
+}
|
|
|
+
|
|
|
+/* ---- command issue (slot 0, polled) ---- */
|
|
|
+
|
|
|
+static int ahci_issue(unsigned int port, const unsigned char fis[20], int write,
|
|
|
+ unsigned int dma_addr, unsigned int bytes)
|
|
|
+{
|
|
|
+ unsigned int *hdr = (unsigned int *)ahci.cl;
|
|
|
+ unsigned char *ct = (unsigned char *)ahci.ct;
|
|
|
+ unsigned int t0, i;
|
|
|
+
|
|
|
+ /* Wait for the port to be idle (previous command finished). */
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while (prd(port, P_CI) & 1u) {
|
|
|
+ if (get_ticks_ms() - t0 > 4000)
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+ if (prd(port, P_TFD) & TFD_BSY)
|
|
|
+ return -1;
|
|
|
+
|
|
|
+ for (i = 0; i < 64; i++)
|
|
|
+ ct[i] = 0;
|
|
|
+ for (i = 0; i < 20; i++)
|
|
|
+ ct[i] = fis[i];
|
|
|
+ /* PRDT entry 0: data buffer + byte count. */
|
|
|
+ ((unsigned int *)(ct + 0x80))[0] = dma_addr;
|
|
|
+ ((unsigned int *)(ct + 0x80))[1] = 0;
|
|
|
+ ((unsigned int *)(ct + 0x80))[2] = 0;
|
|
|
+ ((unsigned int *)(ct + 0x80))[3] = ((bytes - 1) & 0x3FFFFFu) | 0x80000000u;
|
|
|
+
|
|
|
+ /* Command header: CFL=5 dwords, W (write), PRDTL=1. */
|
|
|
+ hdr[0] = 5u | (write ? (1u << 6) : 0) | (1u << 16);
|
|
|
+ hdr[1] = 0;
|
|
|
+ hdr[2] = ahci.ct;
|
|
|
+ hdr[3] = 0;
|
|
|
+
|
|
|
+ pwr(port, P_IS, 0xFFFFFFFFu);
|
|
|
+ pwr(port, P_CI, 1u);
|
|
|
+
|
|
|
+ t0 = get_ticks_ms();
|
|
|
+ while (prd(port, P_CI) & 1u) {
|
|
|
+ if (get_ticks_ms() - t0 > 4000) {
|
|
|
+#if AHCI_DEBUG
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: command timeout\n");
|
|
|
+#endif
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+ }
|
|
|
+ if (prd(port, P_IS) & IS_TFES) {
|
|
|
+#if AHCI_DEBUG
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: task file error, tfd=");
|
|
|
+ serial_puthex(SERIAL_COM1, prd(port, P_TFD));
|
|
|
+ serial_putc(SERIAL_COM1, '\n');
|
|
|
+#endif
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
+ if (prd(port, P_TFD) & TFD_ERR_BITS)
|
|
|
+ return -1;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int ahci_identify_port(unsigned int port, unsigned int *sectors, char model[41])
|
|
|
+{
|
|
|
+ unsigned char fis[20];
|
|
|
+ unsigned int attempt, i;
|
|
|
+ int r = -1;
|
|
|
+
|
|
|
+ for (i = 0; i < 20; i++)
|
|
|
+ fis[i] = 0;
|
|
|
+ fis[0] = FIS_H2D;
|
|
|
+ fis[1] = FIS_C;
|
|
|
+ fis[2] = ATA_IDENTIFY;
|
|
|
+ fis[7] = 0xA0; /* device 0 */
|
|
|
+
|
|
|
+ for (attempt = 0; attempt < 3; attempt++) {
|
|
|
+ r = ahci_issue(port, fis, 0, ahci.bounce, 512);
|
|
|
+ if (r == 0)
|
|
|
+ break;
|
|
|
+ delay_ms(20);
|
|
|
+ }
|
|
|
+ if (r != 0)
|
|
|
+ return -1;
|
|
|
+
|
|
|
+ return ata_identify_parse((const unsigned short *)ahci.bounce, sectors, model);
|
|
|
+}
|
|
|
+
|
|
|
+static int ahci_xfer(unsigned int port, unsigned int lba, void *buf,
|
|
|
+ unsigned int count, int write)
|
|
|
+{
|
|
|
+ unsigned char *p = buf;
|
|
|
+ unsigned char *bounce = (unsigned char *)ahci.bounce;
|
|
|
+ unsigned int done = 0;
|
|
|
+
|
|
|
+ if (!ahci.ok || count == 0)
|
|
|
+ return -1;
|
|
|
+
|
|
|
+ while (done < count) {
|
|
|
+ unsigned int chunk = count - done;
|
|
|
+ unsigned int cur = lba + done;
|
|
|
+ unsigned char fis[20];
|
|
|
+ unsigned int i;
|
|
|
+
|
|
|
+ if (chunk > AHCI_CHUNK)
|
|
|
+ chunk = AHCI_CHUNK;
|
|
|
+
|
|
|
+ for (i = 0; i < 20; i++)
|
|
|
+ fis[i] = 0;
|
|
|
+ fis[0] = FIS_H2D;
|
|
|
+ fis[1] = FIS_C;
|
|
|
+ fis[2] = write ? ATA_WRITE_DMA_EXT : ATA_READ_DMA_EXT;
|
|
|
+ fis[4] = (unsigned char)(cur & 0xFF);
|
|
|
+ fis[5] = (unsigned char)((cur >> 8) & 0xFF);
|
|
|
+ fis[6] = (unsigned char)((cur >> 16) & 0xFF);
|
|
|
+ fis[7] = 0x40; /* LBA mode */
|
|
|
+ fis[8] = (unsigned char)((cur >> 24) & 0xFF);
|
|
|
+ fis[9] = 0; /* LBA4/LBA5: 32-bit LBA only */
|
|
|
+ fis[10] = 0;
|
|
|
+ fis[12] = (unsigned char)(chunk & 0xFF);
|
|
|
+ fis[13] = (unsigned char)((chunk >> 8) & 0xFF);
|
|
|
+
|
|
|
+ if (write)
|
|
|
+ mem_copy(bounce, p + done * 512u, chunk * 512u);
|
|
|
+ if (ahci_issue(port, fis, write, ahci.bounce, chunk * 512u) != 0)
|
|
|
+ return -1;
|
|
|
+ if (!write)
|
|
|
+ mem_copy(p + done * 512u, bounce, chunk * 512u);
|
|
|
+ done += chunk;
|
|
|
+ }
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+int ahci_read_sectors(unsigned int port, unsigned int lba, void *buf, unsigned int count)
|
|
|
+{
|
|
|
+ return ahci_xfer(port, lba, buf, count, 0);
|
|
|
+}
|
|
|
+
|
|
|
+int ahci_write_sectors(unsigned int port, unsigned int lba, const void *buf,
|
|
|
+ unsigned int count)
|
|
|
+{
|
|
|
+ return ahci_xfer(port, lba, (void *)buf, count, 1);
|
|
|
+}
|
|
|
+
|
|
|
+unsigned int ahci_scan(struct ahci_disk *out, unsigned int max)
|
|
|
+{
|
|
|
+ unsigned int port, n = 0;
|
|
|
+
|
|
|
+ if (ahci_init() != 0)
|
|
|
+ return 0;
|
|
|
+
|
|
|
+ for (port = 0; port < ahci.nports && n < max; port++) {
|
|
|
+ if (!(ahci.pi & (1u << port)))
|
|
|
+ continue;
|
|
|
+ if ((prd(port, P_SSTS) & 0x0Fu) != 3)
|
|
|
+ continue;
|
|
|
+ if (prd(port, P_SIG) != SIG_ATA)
|
|
|
+ continue; /* ATAPI / port multiplier / SEMB */
|
|
|
+ if (ahci_identify_port(port, &out[n].sectors, out[n].model) != 0)
|
|
|
+ continue;
|
|
|
+ out[n].port = port;
|
|
|
+ serial_puts(SERIAL_COM1, "ahci: port ");
|
|
|
+ serial_putdec(SERIAL_COM1, port);
|
|
|
+ serial_puts(SERIAL_COM1, " ");
|
|
|
+ serial_puts(SERIAL_COM1, out[n].model);
|
|
|
+ serial_puts(SERIAL_COM1, " ");
|
|
|
+ serial_putdec(SERIAL_COM1, out[n].sectors);
|
|
|
+ serial_puts(SERIAL_COM1, " sectors\n");
|
|
|
+ n++;
|
|
|
+ }
|
|
|
+ return n;
|
|
|
+}
|